开云体育

Just received new Ultra. Test 11: Display Fails. All other tests pass. It all look OK. Any clues

Thanks Erik, I will check that out. Great job on the Ultra!

This video https://www.youtube.com/watch?v=-FIFO5vgGk0 demonstrates how to use the TRACE TABLE to create a maximum 8 (for the ultra)? point linear interpolated gain correction curve -- For more info

I own an ISO-TEE for tapping high-power signals for measurement at reduced levels on TInySA-Ultra. ? ?The tap on it is non linear so it varies with frequency. ? I am looking for a way to apply a

Yes, it does. Thank you, Dick, W1KSZ ________________________________ Sent: Friday, December 23, 2022 6:33 AM To: [email protected] <[email protected]> Subject: Re: [tinysa] Ultra Version Jog Wheel Jog

Jog wheel operation is a secondary means of user input. ?It is fairly straight forward, but is not as user friendly as touch screen operation. Pressing the jog wheel in (no left or right movement)

Remember to get a ~30db amplifier to install between the cal output and the converter. You could use an external source like a GPS controlled 10Mhz oscillator but remember that the frequency will be

Hey Bob, I ordered mine from ebayism # 123657087461, will let you know how it goes after I receive and test it. Mike C. Sand Mtn GA

Here's an example.? This screen shot shows the tinySA-App trace of a single scan (Moving Average Filter: off, Calc: off) with markers.? The corresponding lines of the saved CSV do not show the same

I cannot seem to find it either, however last night some how I did it accidentally Rich

With further study, it seems that the CSV amplitude values range from 10 dBm to 20 dBm lower than the display trace.? Hmm...

Hi all, When exporting CSV trace files from TinySA-App connected to my Ultra, the amplitude values in the file are around 10 dBm lower than traces shown in the app.? I tried many different RBW and

Lane, For me it looks fine, no objections. Your Windows build succeeded, so were done! Martin

Is there some place I can find instructions on use of the "Jog Wheel" ? I looked in the Wiki, but nothing jumped out at me. Tnx es HH, Dick, W1KSZ

Today, with a fresh Git update, this is what I get: (I assume it is correct) Lane $ git describe --tags v1.4-6-g00bde87 Build and re-flash my tinySA ULTRA and get the following version information:

Martin, here is the updated "Compiling from Windows 10" notes: Please review to make sure it is accurate. Seems to work fine here. Lane The following is notes made by Lane and Martin, that describes

That's a good tip Bob, the next prob;em is to get a suitable antenna, i have had success with a pa0rdk "miniwhip antenna" here is a link; https://www.youtube.com/watch?v=ewgPLeKOyCU It receives

Thanks,? I never knew the jog wheel had multiple functions. I guess I need to figure out how I changed the function accidentally Rich

As do I! ?Not only that, I could afford the textbooks. larry

Thanks John. Appreciate the reply. A search for "BG7TBL" returned a lot of stuff on 10MHz sources. I will have another look around using the "SA LF Converter" search terms. Cheers...Bob VK2ZRE