¿ªÔÆÌåÓý

  1. Tinysa
  2. Messages
Expanded Topics Messages Polls
Date
Re: New ULTRA FW release: SD card file names and hangup fix

 

With my TinySA Ultra it works, but the noise level which is -90 dBm on the TinySA is shown as -45 dBm in NanoVna-App 1.1.211. Am I doing something wrong?
Mirek
Re: Preferred behavior of MARKER->REF LEVEL

 

Erik,
? When making the most accurate measurement on the HP spectrum analyzers that I have used, the best practice was to change the reference level to bring the measured signal as close to the top grid as possible to minimize ADC conversion errors.

? Is this also a measurement accuracy consideration for the tinySA Ultra?

Herb
Re: TinySA Ultra - Hardware version "unknown"

 

On Sun, Dec 11, 2022 at 06:34 PM, Paulo Brandao wrote:
touch-screen still not responsive
When I look at your picture, do you still have the protective film on the display?
Preferred behavior of MARKER->REF LEVEL #poll-notice

 

What is your preferred behavior for this marker operation?

Results

Re: TinySA Ultra - Hardware version "unknown"

 

On Sun, Dec 11, 2022 at 09:34 AM, Paulo Brandao wrote:
touch-screen still not responsive and the code you asked is 169
Thanks for the code. Seems ok
For the problem with the touch contact you supplier?
?
--
For more info on the tinySA go to https://tinysa.org/wiki/
Re: New ULTRA FW release: SD card file names and hangup fix

 

I update NanoVNA-App

to 211 version

Now it can detect tinySA ULTRA and correct made screenshots (remote display also work)
Re: TinySA Ultra - Hardware version "unknown"

 

Just update mine, touch-screen still not responsive and the code you asked is 169:
Re: New ULTRA FW release

 

¿ªÔÆÌåÓý

I should have realized it was a misprint, but I hadn't upgraded to the latest FW yet.

On 12/11/2022 8:12 AM, Erik Kaashoek wrote:

On Sun, Dec 11, 2022 at 07:56 AM, Terry Perdue wrote:
Maybe obvious to others, but what does BMO stand for?
Should be BMP as bitmap
?
--
For more info on the tinySA go to

Re: New ULTRA FW release: SD card file names and hangup fix

 

Water Fall ? NanoVNA-App can't do it.
Re: TinySA Ultra and TinySA App

 

On Sun, Dec 11, 2022 at 07:21 AM, Ed Wilson wrote:
The disconnect problem seems to be fixed with installation of the latest firmware...thanks Erik!
confirm - Thanks Erik for the fast solution

Wolfgang
Re: New ULTRA FW release: SD card file names and hangup fix

 

/g/tinysa/files/Get_ScreenSE.zip
For Ultra enable H4 option.
As i see software not correct made screensots (lost first byte and swap pixels color)
Visible this artefacts on zoom:


NanoVNA-App and TinySA-App made correct dumps

Re: Information TinySA Ultra modified for serial communications #csv #feature_request

 

Jorge the zeenko store on aliexpress has 22 units in stock, at the rate of 20 per day you have to be quick;



Hope this helps, Max.


On Monday, December 12, 2022 at 01:59:12 AM GMT+13, Jorge Sanguinetti <k6jst@...> wrote:


Erik,

I am bound by a strict NDA on why, when, and how the units WILL fly.

As the project progresses, I will certainly update you if you wish.?

My registration has my email, please reach out that way.

Now that I know serial communications are an option, three units will go? ...3, 2, 1 ignition!

If the vehicle team allows it, there will also be a video.

Now, for the tricky part... find four or five TinySA Ultras, for it is out of stock everywhere.

If you have the answer to that one, I will put my supply chain folks on the task.

Thank you for replying... much appreciated.

File /Get_ScreenSE.zip uploaded #file-notice

Group Notification
 

The following files and folders have been uploaded to the Files area of the [email protected] group.

By: Aleksander Shalygin <shalygin@...>
Re: New ULTRA FW release: SD card file names and hangup fix

 

/g/tinysa/files/Get_ScreenSE.zip
For Ultra enable H4 option.
Re: #ultra Bug in the correction #ultra

 

Now it works. Thanks.
--
Klaus, DL5KV
Re: #ultra Correction table frequencies #ultra

 

Now I optimized the calibration points and calibrated with a R&S SMA100A. After Calibration I wobbled it. The SMB100A can only operate to 3.2GHz.
The wobble results after self-calibration:


The results after optimizing and calibration with the SMB100A:

It's very good.
--
Klaus, DL5KV
Re: New ULTRA FW release: SD card file names and hangup fix

 

There is no change log apart from searching for "new FW release" in this group.
The only change log is in github?
I do not do releases in github
Up till now SW updates have always been backwards compatible and never dropped a function so you should always be able to use the latest FW
--
For more info on the tinySA go to https://tinysa.org/wiki/
Re: New ULTRA FW release: SD card file names and hangup fix

 

On Sun, Dec 11, 2022 at 08:00 AM, DiSlord wrote:
tinySA as NanoVNA use color command for change color:
color {id} {rgb24}

id - color palette index:
LCD_BG_COLOR? ? ? ? ? ? ?0? ? ?- background color
LCD_FG_COLOR? ? ? ? ? ? ?1? ? ?- foreground color
LCD_GRID_COLOR? ? ? ? ? ?2? ? ? - grid lines color
LCD_MENU_COLOR? ? ? ? ? ?3? ? - UI menu color
LCD_MENU_TEXT_COLOR? ? ? 4? - UI menu text color
LCD_MENU_ACTIVE_COLOR? ? 5 - UI selected nemu color
LCD_TRACE_1_COLOR? ? ? ? 6? - trace 1 color (temp trace)
LCD_TRACE_2_COLOR? ? ? ? 7? - trace 2 color (dtored trace)?
LCD_TRACE_3_COLOR? ? ? ? 8 - trace 3 color (actual trace)
LCD_TRACE_4_COLOR? ? ? ? 9
LCD_NORMAL_BAT_COLOR? ? 10? - battery icon normal color
LCD_LOW_BAT_COLOR? ? ? ?11 - bttery icon low color
LCD_TRIGGER_COLOR? ? ? ?12? - trigger line color
LCD_RISE_EDGE_COLOR? ? ?13? - UI menu button border color?
LCD_FALLEN_EDGE_COLOR? ?14 - UI menu button border color
LCD_SWEEP_LINE_COLOR? ? 15? - sweep progress bar color
LCD_BW_TEXT_COLOR? ? ? ?16 -?
LCD_INPUT_TEXT_COLOR? ? 17 - UI keyboard input text color
LCD_INPUT_BG_COLOR? ? ? 18 - UI keyboard background color
LCD_BRIGHT_COLOR_BLUE? ?19
LCD_BRIGHT_COLOR_RED? ? 20
LCD_BRIGHT_COLOR_GREEN? 21
LCD_DARK_GREY? ? ? ? ? ?22
LCD_LIGHT_GREY? ? ? ? ? 23
LCD_HAM_COLOR? ? ? ? ? ?24
LCD_GRID_VALUE_COLOR? ? 25? - grid text color
LCD_M_REFERENCE? ? ? ? ?26
LCD_M_DELTA? ? ? ? ? ? ?27
LCD_M_NOISE? ? ? ? ? ? ?28
LCD_M_DEFAULT? ? ? ? ? ?29
rgb24 - color in RGB24 hex format (RRGGBB)
Example one of online tools for select color

If select RED result in HEX:?ff0000
so for example need set red greed color ( LCD_GRID_COLOR? ? 2)?need send:
color 2 0xff0000
after all not forget save config
saveconfig
? ?Thanks, DiSlord and stay safe. We appreciate your firmware contributions, both on the tinySA and nanoVNA platforms.

Herb
Re: New ULTRA FW release

 

On Sun, Dec 11, 2022 at 07:56 AM, Terry Perdue wrote:
Maybe obvious to others, but what does BMO stand for?

- Added STORAGE/LOAD BMO_._,_._,_
A misprint. Should be "LOAD BMP".? Loads a stored bitmap file back to the screen.

Herb
Re: New ULTRA FW release: SD card file names and hangup fix

 

On Sun, Dec 11, 2022 at 07:17 AM, hwalker wrote:
Maybe you or DiSlord can provide some example cmd files for setting various color schemes on the tinySA Ultra
tinySA as NanoVNA use color command for change color:
color {id} {rgb24}

id - color palette index:
LCD_BG_COLOR? ? ? ? ? ? ?0? ? ?- background color
LCD_FG_COLOR? ? ? ? ? ? ?1? ? ?- foreground color
LCD_GRID_COLOR? ? ? ? ? ?2? ? ? - grid lines color
LCD_MENU_COLOR? ? ? ? ? ?3? ? - UI menu color
LCD_MENU_TEXT_COLOR? ? ? 4? - UI menu text color
LCD_MENU_ACTIVE_COLOR? ? 5 - UI selected nemu color
LCD_TRACE_1_COLOR? ? ? ? 6? - trace 1 color (temp trace)
LCD_TRACE_2_COLOR? ? ? ? 7? - trace 2 color (dtored trace)?
LCD_TRACE_3_COLOR? ? ? ? 8 - trace 3 color (actual trace)
LCD_TRACE_4_COLOR? ? ? ? 9
LCD_NORMAL_BAT_COLOR? ? 10? - battery icon normal color
LCD_LOW_BAT_COLOR? ? ? ?11 - bttery icon low color
LCD_TRIGGER_COLOR? ? ? ?12? - trigger line color
LCD_RISE_EDGE_COLOR? ? ?13? - UI menu button border color?
LCD_FALLEN_EDGE_COLOR? ?14 - UI menu button border color
LCD_SWEEP_LINE_COLOR? ? 15? - sweep progress bar color
LCD_BW_TEXT_COLOR? ? ? ?16 -?
LCD_INPUT_TEXT_COLOR? ? 17 - UI keyboard input text color
LCD_INPUT_BG_COLOR? ? ? 18 - UI keyboard background color
LCD_BRIGHT_COLOR_BLUE? ?19
LCD_BRIGHT_COLOR_RED? ? 20
LCD_BRIGHT_COLOR_GREEN? 21
LCD_DARK_GREY? ? ? ? ? ?22
LCD_LIGHT_GREY? ? ? ? ? 23
LCD_HAM_COLOR? ? ? ? ? ?24
LCD_GRID_VALUE_COLOR? ? 25? - grid text color
LCD_M_REFERENCE? ? ? ? ?26
LCD_M_DELTA? ? ? ? ? ? ?27
LCD_M_NOISE? ? ? ? ? ? ?28
LCD_M_DEFAULT? ? ? ? ? ?29
rgb24 - color in RGB24 hex format (RRGGBB)
Example one of online tools for select color

If select RED result in HEX:?ff0000
so for example need set red greed color ( LCD_GRID_COLOR? ? 2)?need send:
color 2 0xff0000
after all not forget save config
saveconfig
11241 - 11260 of 19590