开云体育

Perfect!? I see it now and it is working perfectly.? Thank you!

Hi Erik and Herb Thank you both for the info, which I was aware of. The problem I had was that is did not realize the Ref level and level/division is fixed and frozen by a factor of 10 and no other

Peak hold is under the CALC menu CALC moved from the LEVEL menu to the DISPLAY menu in the latest FW

Yes. You can use peak hold

I’m testing an enclosure and need to place the tinySA inside and test received signal strength of a fundamental. ?I would think I can enter it into a peak hold type setting for when I can get it

There is a bug that causes strange auto reflevel behavior when in linear mode and changing the scale from small to a larger value. E.g. from 2 to 10. This causes the reflevel to reposition after one

Kurt, From the beta testing phase, I seem to recall that for V and W units Erik cautioned the following: 1. The units are linear so measurements are best performed in the time domain (zero-span). 2.

Hi Erik Yuo are wellcome ? I am producing videoclips right now and I am afraid the Unit V and W are corrupted one way or the other. There are some weird interactions so when changing level per

This marker ops behavior is copied from the nanoVNA, I actually never understood how to use it, except for the "CENTER" ops. Glad you guys helped me understand.....

Thanks Kurt, I read the wiki but I misinterpreted the meaning of "span to the offset".? With two markers displayed it makes sense and is very useful. - With two markers displayed, selecting Marker

I hope you do! ? ? ? larry

Hi Herb * Span is described in the WiKi as “Keep the Center frequency but set the span to the offset of the active marker” It is the offset relative the center frequency. If there is two tracking

Hi Herb Great thank you, now I understand see the possibilities If I figure out the span I will let you know ? Kind regards Kurt Fra: [email protected] <[email protected]> P? vegne af

Hi Karl Sorry, that is because he might have used the subject line then my mail rules put it in the TinySA folder Well, the answer was The OZ is the official Danish Ham magazine like the QST is in

Kurt, you may have replied to Joe, but not as part of this thread. ;) Karl Heinz - K5KHK

Hi George See my reply to Joe ? Kind regards Kurt Fra: [email protected] <[email protected]> P? vegne af George WD8NHI Sendt: 27. august 2020 03:57 Til: [email protected] Emne: Re: [tinysa]

Dear all, I see that this subject leads to interesting different point of views. As I wrote in my previous message, the purpose remains first "educational", just also highlighted by Herb with its

Hi Kurt Congratulations on your article. I did a web search but could not find the HAM magazine OZ you spoke of. Hoping you can provide a web link for the magazine and your

Kurt, I'm sure the article will be well received - as is generally the case with your technical publications.? Here's what I have found out about marker ops. 1.? Marker OPS -> Center:? This

Hi Erik I have just written a 30 page document on the TinySA with 95 illustrations for the HAM magazine OZ and in this connection used the markers a great deal. They work excellent (using latest