开云体育

Dick Yes, you should download and install *** STSW-STM32080 *** If you are on windows you can also update with the dfu-util-static.exe program (if you have the right drivers

On Mon, Aug 24, 2020 at 08:49 AM, EB4APL wrote: .....Is there a more recent version of tinySA.exe than 1.0.7528.21513? ======================================================= Ignacio, The latest

UPS It was version revised 0.1.0-58 I updated to so here we go again ? Kind regards Kurt Fra: [email protected] <[email protected]> P? vegne af Erik Kaashoek Sendt: 24. august 2020 17:50 Til:

Finally got to download the STSW zip file, but do not see anything labelled DfuSe Tools. There is a DfuSe Demo, is that it ?? Excuse my paranoia, but I have been burned in the past with label

Hi Erik I did see you made a new update and all three TinySA is updated and calibration is OK, thank you Kind regards Kurt Fra: [email protected] <[email protected]> P? vegne af Erik

The latest version will always be here: http://athome.kaashoek.com/tinySA/Windows/ The version available is?1.0.7528.21513, so yes, you have the latest version

Kurt, Thanks for testing to quickly! The level cal problem was caused by the attenuator problem and is solved in v1.0-59

Tank you Herb, that explains what I had observed. Is there a more recent version of tinySA.exe than 1.0.7528.21513? Best regards, Ignacio EB4APL

Release V1.0-59 that solved problems 1 and 3 Solving problem 2: when multiple marders AND display paused AND dragging a marker the marker info is not updated will take some more time.

The site at TinySA.org is quite helpful. But I am having problems updating the Firmware. It directs me to st.com to download DfuSe Tools. However, when I get there, all I see is STSW-STM32080 and no

Hi Erik The calibration procedure has been corrupted with this new version. Actual power calibration at -20dBm input find a marker value at -40dBm at first attempt. At second attempt to calibrate

Herb, Please download again and the attenuation problem should be solved. I will look into the other issues

On Mon, Aug 24, 2020 at 06:48 AM, EB4APL wrote: I have downloaded tinySA v 1.0.7528.21513, I think that there are newer versions, but I can't find them, at least a compiled executable for Windows. I

Wow Erik!? I wasn't expecting a change until your next major release - if any.? I noticed the following after updating to 0.1-58 and doing 1.) clearconfig 1234, 2.) reset, 3.) leveloffset low 0

Hi, I have downloaded tinySA v 1.0.7528.21513, I think that there are newer versions, but I can't find them, at least a compiled executable for Windows. I have some operating questions, for

New FW released Version v0.1-58 Changes: - Added MARKER/SEARCH MARKER/PEAK SEARCH which disables the tracking attribute of the active marker and positions the active marker as the global maximum

OK, found the problem: my terminal programs was not configured for sending CR or CRLF after each command. Thank you for their help to all who responded. 73 de Ignacio EB4APL

Hi Dave, I don't know what I'm doing wrong. I just get echos from the tinySA with everything that I wrote, these echos come from the device, the terminal program has the echo option disabled. This

I'm not protesting about the VAT and duties charges, I always pay these. Probably in Denmark you, as a private person, cannot personally make the clearance but here in Spain any individual can do the

Hi Ignacio Sorry to tune in on this matter. I think the tax and Custom system are not much different than her in Denmark. DHL is forced to do this sort of VAT and custom duties, and cannot leave it to