开云体育

I've had a long think about the data and I am convinced the sidelobes are a function of the time domain measurement window. A Wiener inverse is not needed to fix that. Mathematically, for N Hz RBW

Mike, You probably need a LNA if you are comparing relatively weak TV signals. It would be a good idea to use a 75 ohm input LNA, then the mismatch at the output to the 50 ohm tinysa would be

Yes it is. I have used my unit to accurately aim TV antennas, and to compare response of different antennas. I did find that if I tried to look at more than 2 channels of data it was hard to get

Hi all, I have ordered, but not received my TinySA yet. (R&L) I want to compare two TV antennas. Is the TinySA sensitive enough to show the signals that a TV will receive. The frequency range I'm

Its an illegal clone infringing on our trademark -- ------------------------------------------ For more info on the tinySA go to https://tinysa.org/wiki/

Is this official or modified clone? https://pt.aliexpress.com/item/1005003112093679.html

Thanks to all for the help. I got most of what I was looking for (happy now). It's doing what I want, just need to spend a bit more time firming up the details. Then saving it in default

You can use PRESET/STORE/STORE 1 or even PRESET/STORE/STORE AS STARTUP to save this configuration for quick recall -- ------------------------------------------ For more info on the tinySA go to

Herb, Ah! now the light begins to shine. Okay *thanks* all, I will get at this latter today and see what I can accomplish.

Don, There is a "release" directory and a "beta" directory that Erik uses.? The new experimental beta release 1.3-315 at?http://athome.kaashoek.com/tinySA/DFU/beta/ adds the trace menu (see the

Erik, You got me? I don't see anywhere in the menu tree where I have access to "TRACE", is it in a hidden menu? Is this in a older firmware version? I'm totally loss here. If you have the time and

tinySA support color console command (i port it fom NanoVNA code): color index hex_color For get color in hex you can use any soft like https://colorscheme.ru/color-converter.html Example for change

First select trace 3 TRACE/TRACE/TRACE 3 now enable trace 3 TRACE/ENABLE trace 3 is now enabled, just like trace 1. now set trace 1 in max decay mode select trace 1 TRACE/TRACE/TRACE 1 and enable max

Thanks Eric, It seems that I already had the latest FW beta Version, and I want *those* colors reversed! So does that mean that in one of the older FW versions this would be true? Or maybe I don't

In beta FW you can enable the red trace as the active trace and the yellow trace also active but with delayed decay. Give it a try. ------------------------------------------ For more info on the

Is there anyway to change the colors of the traces?. I want to have the active t(fast) race, while using the delayed decay to be Yellow (not Red), In other words, the reverse as it is now. Thanks

Thanks Igor! That looks to have resolved the issue. All self tests now pass. This is the result of the tests requested by Erik:

After battery reset.

A friend reported something similar (image attached). Then the command clearconfig was executed (initially it seems to have no effect). Finally after disconnecting from the battery and reconnecting,

I have also noticed a constant 1MHz saw tooth signal on the high port that starts right after turning the unit on. No signal seen on the low port. Both checked using an oscilloscope.