Re: Source for TinySA antenna please
Yup. That's the one I ordered. Thanks! *** Walt ***
On Thursday, February 4, 2021, 12:07:22 PM PST, F1RVC <f1rvc.patrice@...> wrote:
Hi, this one look to be very similar.
73 Patrice
I found a similar small one (300mm/~12inches extended) on Ali, placed an order. Most others were 482mm (~19inches) extended or longer. Ordered one of those also. Thanks. *** Walt *** WA7SDY ***
On Thursday, February 4, 2021, 05:45:31 AM PST, Erik Kaashoek < erik@...> wrote:
Did you search AliExpress? Try "SMA" combined with "antenna"
------------------------------------------
For more info on the tinySA go to
|
I use a toothpick or sometimes a chopstick from my local greasy Chinese takeout. Both work just great.
--
--
73 de k1jbd
bammi
|
On Thu, Feb 4, 2021 at 12:00 PM, F1RVC wrote:
I do not recommend using? full colored tylus
On my debugging tinySA I'm using the solid stylus, no visible screen damage, even after many months of rather intensive usage. ?
------------------------------------------
For more info on the tinySA go to https://tinysa.org/wiki/
|
Re: Source for TinySA antenna please
Hi, this one look to be very similar.
73 Patrice
I found a similar small one (300mm/~12inches extended) on Ali, placed an order. Most others were 482mm (~19inches) extended or longer. Ordered one of those also. Thanks. *** Walt *** WA7SDY ***
On Thursday, February 4, 2021, 05:45:31 AM PST, Erik Kaashoek < erik@...> wrote:
Did you search AliExpress? Try "SMA" combined with "antenna"
------------------------------------------
For more info on the tinySA go to
|
I'm using NDSL stylus with? transparent nylon points. I do not recommend using? full colored tylus , they are cheaper but the point is hard and not very soft for the screen. ?(NDSL stand for Nintend0 DS Lite)
These are OK:
These are not ok:
Regards.
Le?jeu. 4 f¨¦vr. 2021 ¨¤?20:39, Richard Hendricks < rickh6155@...> a ¨¦crit?: Eric:
Can you tell us what stylus you use for your tinySA, and a source for it?
Thanks,
Rick Hendricks - KE0GB
|
Re: Starting this month, we have printed power warning labels on the surface of tinySA.
We added a link to the wiki in the box in the hope people would read the specification:? --
------------------------------------------
For more info on the tinySA go to https://tinysa.org/wiki/
|
I'm using a plastic refill pencil WITHOUT pencil, so basically a pointy hard plastic thing. "Papermate non-stop" Or search for a stylus for a resistive screen (not capacitive!!!), plenty on Amazon or eBay --
------------------------------------------
For more info on the tinySA go to https://tinysa.org/wiki/
|
Eric:
Can you tell us what stylus you use for your tinySA, and a source for it?
Thanks,
Rick Hendricks - KE0GB
|
Re: Starting this month, we have printed power warning labels on the surface of tinySA.
On 2021-02-04, at 19:16, John Cunliffe W7ZQ < n2nep@...> wrote:
Anyone who would assume the input not to be 50 ohms better not play with RF test equipment and go back?playing in his sand castle¡?
Yeah, but at least HP caters to the denizens of the sand castle. (The max power warning label is the yellow thing on the lower side of the N connector.)
|
Re: Source for TinySA antenna please
I found a similar small one (300mm/~12inches extended) on Ali, placed an order. Most others were 482mm (~19inches) extended or longer. Ordered one of those also. Thanks. *** Walt *** WA7SDY ***
On Thursday, February 4, 2021, 05:45:31 AM PST, Erik Kaashoek <erik@...> wrote:
Did you search AliExpress? Try "SMA" combined with "antenna"
------------------------------------------
For more info on the tinySA go to https://tinysa.org/wiki/
|
Re: New user - tinySA Config-Touch Cal failure
#tinysa
On Wed, Feb 3, 2021 at 01:38 PM, salgoud395 wrote:
? I did not understand that one can bring up the by menu pressing the Jog Switch down and then use it to navigate to ¡°Touch¡±>> ¡°Touch CAL¡±.?
I've added this to the FAQ in the wiki ? --
------------------------------------------
For more info on the tinySA go to https://tinysa.org/wiki/
|
Re: Starting this month, we have printed power warning labels on the surface of tinySA.
On Thu, Feb 4, 2021 at 08:02 AM, Hugen wrote:
I will continue to pay attention to community feedback and actively improve production.
Hugen, I have a suggestion for you.? Why not add one of these SMA 20 dB attenuators to the TinySA package?? They are available in China for only a few dollars and would only raise the price of the TinySA package a little bit. ? This would mean signals up to 1 watt could be safely be used with the TinySA and if a higher level was used it would damage the attenuator but probably save the TinySA.
|
Re: Starting this month, we have printed power warning labels on the surface of tinySA.
Anyone who would assume the input not to be 50 ohms better not play with RF test equipment and go back playing in his sand castle...?
|
Re: Starting this month, we have printed power warning labels on the surface of tinySA.
On 2021-02-04, at 17:56, hwalker <herbwalker2476@...> wrote:
+10dBm RF
If you know the inputs are 50 ¦¸, yes. Then 10 dBm is equivalent to 0.707 V (rms) 1.000 V (peak for sine input) 2.000 V (peak-peak for sine input) (It would be nice to know which of these are the real limits ¡ª it says ¡°power¡± so it would be the rms voltage, and there would be no problem with peaks higher than those exhibited by sine waves.) Gr¨¹?e, Carsten
|
Re: Starting this month, we have printed power warning labels on the surface of tinySA.
On Thu, Feb 4, 2021 at 08:36 AM, <rcbenedict1545@...> wrote:
Hard to read. Does it give max power in?
Ray, ? The max power is printed on the front in a format that is standard for commercial spectrum analyzers, " +10dBm, 10Vdc".? +10dBm RF or 10Vdc are both maximum limits. - Herb
|
Re: Starting this month, we have printed power warning labels on the surface of tinySA.
Hard to read. Does it give max power in?
Ray
|
Re: Starting this month, we have printed power warning labels on the surface of tinySA.
On 2021-02-04, at 17:02, Hugen <hugen@...> wrote:
SA-20020001
Is that the first one from the batch that was made in the year 2002? SCNR. Gr¨¹?e, Carsten
|
Starting this month, we have printed power warning labels on the surface of tinySA.
Since we have received multiple reports of damage to the attenuator due to input signals exceeding the limited power, starting with the serial number SA-20020001, we have printed the maximum power warning label on the surface.? Next?month,?after?the?front?panel?that?has?been?printed?with?silk-screened?port?labels?is?used?up,?the?port?labels?will?also?be?directly?printed?with?lasers.
I will continue to pay attention to community feedback and actively improve production.  
|
Re: Source for TinySA antenna please
Did you search AliExpress? Try "SMA" combined with "antenna"
------------------------------------------
For more info on the tinySA go to https://tinysa.org/wiki/
|
Re: New user - tinySA Config-Touch Cal failure
#tinysa
On Wed, Feb 3, 2021 at 01:38 PM, salgoud395 wrote:
I did not understand that one can bring up the by menu pressing the Jog Switch down and then use it to navigate to ¡°Touch¡±>> ¡°Touch CAL¡±.
See this video :?https://www.youtube.com/watch?v=LghlQ_aWjAs ? --
------------------------------------------
For more info on the tinySA go to https://tinysa.org/wiki/
|
Walt WA7SDY
WS1M - bammi
Richard Hendricks - KE0GB
Roger Need
John Cunliffe W7ZQ