Re: Turn off display
Some of the new mini-pcs have USB ports that are not powered. Joe
By
Joe
·
#20163
·
|
Re: Turn off display
Correct -- Designer of the tinySA For more info go to https://tinysa.org/wiki
By
Erik Kaashoek
·
#20162
·
|
Re: Hunting Spurious Emission at 154 MHz
I seem to recall a particular problem was cable channel 52(?) coming up in the 2 meter band. 73, Don N2VGU
By
Donald S Brant Jr
·
#20161
·
|
Re: Turn off display
Jus wondering: if you use the USB-C connection for serial isn't the battery charging? So you are not losing but gaining mAh's?
By
pa3cqn
·
#20160
·
|
Re: #tinysa #ultra Leveling TinySA Ultra with damaged LNA
#tinysa
#ultra
When I search for a zk10 I get all kinds off stuff also. But when I search on zk10d I get the chip. Be adware that the results differ from country to country. I tried the link also, message "oeps does
By
pa3jem@...
·
#20159
·
|
Re: #tinysa #ultra Leveling TinySA Ultra with damaged LNA
#tinysa
#ultra
Link definitely works in Australia, but I then tried changing the delivery address to my daughters address in USA Ma, and it then said "Page not found" You might need to have a conversation with your
By
Tweeter103
·
#20158
·
|
Re: #tinysa #ultra Leveling TinySA Ultra with damaged LNA
#tinysa
#ultra
Works in Australia
By
Tweeter103
·
#20157
·
|
Re: Hunting Spurious Emission at 154 MHz
My experience agrees with yours re MATV. I work in large stadiums, and it is unusual to monitor TV channels that should not be there "Over the Air" and indeed are not measurable when moving to
By
Tweeter103
·
#20156
·
|
Re: #tinysa #ultra Leveling TinySA Ultra with damaged LNA
#tinysa
#ultra
Seller sent me same link, and i guss it does not ship to my region. Aliexpress returns 404 for me.
By
morpheus
·
#20155
·
|
Re: #tinysa #ultra Leveling TinySA Ultra with damaged LNA
#tinysa
#ultra
This one worked for me.
By
Terry W7AMI
·
#20154
·
|
Re: #tinysa #ultra Leveling TinySA Ultra with damaged LNA
#tinysa
#ultra
What can I say? For me it popped up a tiny square "blue smoke" container that amplifies radio signals. Maybe try ZK10D. The point was that a quick search will solve the problem more quickly than a
By
Jim Shorney
·
#20153
·
|
Re: #tinysa #ultra Leveling TinySA Ultra with damaged LNA
#tinysa
#ultra
That link works fine here in UK¡. Peter
By
Prawlin
·
#20152
·
|
Re: #tinysa #ultra Leveling TinySA Ultra with damaged LNA
#tinysa
#ultra
Really?? This is what comes up: ZK10 Flashlight Box Tool Storage Case For 18650 Battery LED Flashlight 14500 Torch/Lamp Battery Charger Holder 5 Sizes Outdoor Mike C. Sand Mtn GA
By
Mike C.
·
#20151
·
|
Re: #tinysa #ultra Leveling TinySA Ultra with damaged LNA
#tinysa
#ultra
Type ZK10 into the search box. "Mike C. via groups.io" <mg@...> wrote: -- 73 -Jim NU0C
By
Jim Shorney
·
#20150
·
|
Re: #tinysa #ultra Leveling TinySA Ultra with damaged LNA
#tinysa
#ultra
Very interesting. It works for Canada. But indeed? it does not work for USA, UK, France, Spain...
By
Andrew Matros
·
#20149
·
|
Re: #tinysa #ultra Leveling TinySA Ultra with damaged LNA
#tinysa
#ultra
That link does NOT work. Mike C. Sand Mtn GA
By
Mike C.
·
#20148
·
|
Re: #tinysa #ultra Leveling TinySA Ultra with damaged LNA
#tinysa
#ultra
They are listed - https://www.aliexpress.com/item/1005008670985678.html I doubt you can use the BGA2817 instead. They have a different pinout, and the powering method is not the same either. In the
By
Andrew Matros
·
#20147
·
|
Re: #tinysa #ultra Leveling TinySA Ultra with damaged LNA
#tinysa
#ultra
So.. I received LNA's (BGA2817), but it turns out i need Zeenko's ZK10D. They are not listed on theirs aliexpress store. I wrote them, waiting for answer. Is there any way to bodge BGA2817 in there?
By
morpheus
·
#20146
·
|
Re: Turn off display
Correct -- Designer of the tinySA For more info go to https://tinysa.org/wiki
By
Erik Kaashoek
·
#20145
·
|
Re: Turn off display
Is "Brightness" only on the bigger models? I don't see "Brightness" on the TinySA Basic. Brilliant device. I used to have an HP141T with all the band plugins and then replaced it with a Rigol (up to
By
Mike EI9FEB
·
#20144
·
|