开云体育

I was curious if there was a way to send the triggered state of the tinySA over USB. I would like to be able to monitor some specific bands trigger at some threshold then store the data and then send

Can you explain? [email protected]> wrote:

The version is shown on the label at the back.

does not work even when selecting no measurement occurs on firmware tinySA4_v1.4-189 чт, 12 дек. 2024 г., 16:46 Igor Feher via groups.io <igor.feher= [email protected]>:

Does the tinySA Ultra ZS405 have the ability to record data over an extended period, such as 5 minutes? Currently, it only seems to offer a capture feature for screenshots, but I want to log raw data

tinySA basic has same open bottom.

Hello, first-time TinySA user here. I got an ULTRA so not sure if this issue also exists in its predecessor. It came loaded with FW version 1.4.156 and the gridlines were rendering "properly", looking

Hi John, In his first post in this thread, Hugen stated: "... the ZS-406 will go on sale next week and the ZS-407 is expected to go on sale at the end of December." 73 Evan AC9TU

So far I only see the 406 and 406 on Ali express Zeenko store. Seems the 407 is not yet on the market. The 406 is priced at US120 plus shipping and tax. John

Sorry if the question is not in the right place. how can we know which version it is, ZS-405, ZS-405 or ZS-407

Please be careful with external pre amplifiers. Remember, if it is directly connected to the input of the SA and the input of the pre-amp sees a signal of 0dbm, the spectrum analyzer sees +20dbm. Way

Input RF switch U22:AS179-92LF LNA U14:BGA2817 Attenuator U38:PE4312C-Z You can try replacing them.

Thanks Roger, I looked everywhere and I didn't find any component references for the input stages. Also I'm not sure I can repair, the size of the components is really small. To help diagnose a

There is a simpler way to test See: https://tinysa.org/wiki/pmwiki.php?n=Main.CheckTheAttenuator -- Designer of the tinySA For more info go to https://tinysa.org/wiki

Hi Erik, yeah .. the test 13 ( attenuator test ) failed too. One of the photos I posted yesterday shows it. My specialization is completely different and all my experiences with all this are just 2

Hi Cor, Ah, yeah, you know ..relatives, family, parents, what else can we do? :-) We should help each other. Even though this time it didn't turn out well. Yes, the device is still under warranty. I

Unfortunately no.? The manufacturer does not sell replacement boards or parts.? You can order parts from electronics vendors and replace them if you are able to do SMD repair.? The part numbers are

Hello, this may not be the right place but oh well! I fried the input of my tinysa ultra, a few microseconds switching. Is it possible to buy a replacement motherboard and where? Thanks, Daniel

This is what I had in mind. Bandwidth is good for sines up to 500kHz. This is square vs sine 10kHz. Bottom is the diff. [email protected]> wrote:

Why is it that when we are "given" (yes, quite competitive with the big boy's offerings!), we always want more. Take what's given to us and be creative - the following: If it were me and I had a