开云体育

Its a clone and I'm not involved. -- Designer of the tinySA For more info go to https://tinysa.org/wiki

Hello, I have seen a proposal for a? spectrum analyzer called SA5 on the Banggood web site (french version). Looking at the features show that it sounds as an Ultra SA (or not). It is sold on the

Measure the call output with LNA on and LNA off It should be around -35dBm If the level is about correct with LNA on then you probably blown the attenuator If the level with LNA on is as bad as with

1uF -- Designer of the tinySA For more info go to https://tinysa.org/wiki

Hi, please i need help , wich is the value of C58 capacitor? , is in short circuit , i replaced lna chip, the input switch and attenuator too, all test run ok , but measured this capacitor reveal is

Hello everyone. I had a similar problem. Unscrewed four screws and open the case. The large cable fits well. The small one from the touchscreen goes under the display, I lifted the display slightly

Can you clarify what you mean? Does the LNA stay on when I do the self test?

Thank you, I really didn't read this page carefully

Hi, Related to subject: antenna/RF signal type details in video: DJI mini 2? ?5,8GHz https://youtu.be/ssTLa3vqSQ8?si=Ed1CYqdtQQkg1zaW Regards, Toni

Filters are your friends.

The script you used is for the tinySA.? The tinySA and tinySA Ultra use different scaling factors to convert from raw_data to dBm power: # tinySA: ?SCALE = 128 # tinySA Ultra: SCALE = 174 SCALE =

I guess you didn't read the wiki page on the ultra mode before applying the unlock code? -- Designer of the tinySA For more info go to https://tinysa.org/wiki

Hi, I'm new here and may have missed a similar discussion. My TinySA duplicates frequencies starting from 1100 MHz and ending with 3500 MHz. Perhaps frequencies lower and higher are affected, I was

In my case I never had a problem with the shipment to Italy of the dozens of items that I bought on Aliexpress. Also consider that I bought the TinySA Ultra from Zeenko store on Aliexpress in May

Its not my code, I just found it.? I can't answer the questions.

Hi Chin-Leong, You may have already seen my post a few minutes ago that the latest version of the document is soon to be released by Kurt Poulsen and me once Kurt does a review of my updates and

Kurt Poulsen and I have been jointly updating the menu documentation for the TinySA Ultra but I'm unaware of who is doing a similar Menu Chart document for the TinySA.? BTW, there will be a new

Hi Rich, thanks for your suggestion. I tried your code to output values from 5GHz to 6GHz. While the screen of my tinySA device shows values from -80 dbm to -65 dbm, but your code output values from

Hi David, At a cursory glance, it looks up-to-date; i.e. PAUSE is the topmost tab in the primary menu. Thanks for updating the document. 73, Chin-Leong Lim, 9W2LC

That TinySaUltra ?document ?is excellent! Is there an updated version for the TinySa at the latest available FW (version 1.4-175)? ?What I currently have is dated March 2021. -- 73, Bernie,