开云体育

From v0.10.1 of QtTinySA you can define your own preset frequency markers and set them to different colours.? It also has a "3D" display that shows the sweep changing over time. QtTinySA (

If you are interested in frequency management look here https://github.com/berkon/wireless-microphone-analyzer -- Designer of the tinySA For more info go to https://tinysa.org/wiki/

Ah thank you, this software is quite good! But I work exclusively with Wisycom and Shure. Would it be possible to create your own UHF frequency banks based on services and live scans? Yours

See: https://tinysa.org/wiki/pmwiki.php?n=Main.PCSW -- Designer of the tinySA For more info go to https://tinysa.org/wiki/

Thank-you for your response. And will the unit work with Linux OS ? Kind regards, Jonathan Burns Sent: 07 March 2024 16:02 To: [email protected] Subject: Re: [tinysa] FW: TinySA Ultra

The current tinySA Ultra uses harmonic mode above 5.3GHz. This reduces sensitivity a bit but the ability to detect transmissions has been demonstrated up to and above 10 GHz So no need to wait for

Sent: 07 March 2024 15:48 To: '[email protected]' <[email protected]> Subject: TinySA Ultra enquiry Dear Sirs, I am very interested in purchasing the latest TinySA Ultra model from

Look for: Wireless Microphone Analyzer Version: 2.0.0 Author: Bernd Konnerth (bernd@...)

Correction /g/tinysa/topic/103570863

Search the group for previous posts using the keyword 'microphone' e.g. /g/tinysa/topic/10357086 Regards, Martin

Hello! I would like to know if it was possible to "block" frequencies to be able to monitor them over time on the tiny sa ultra's PC software. Let me explain: I work in live performance and the tiny

Please do not ask here about clones unless: You did NOT buy from seller on the "safe places to buy from" list and A selftest fails -- Designer of the tinySA For more info go to

Yes and no :-) It depends upon what you are trying to do, and the frequency range you are interested in. For VHF and UHF frequencies at relatively short ranges it will probably be OK, but at lower

... Erik, sorry fo a blurred pic; this is a sharper one. Ilkka/oh7ti ti 5. maalisk. 2024 klo 13.04 Ilkka Sysila via groups.io <ilkkasysila= [email protected]> kirjoitti:

Erik, hi there! Though you may be fed up with enquiries like this, I dare to ask whether mine is the real thing. Bought it from Eleshop Netherlands. Best spring greetings, Ilkka/oh7ti, Helsinki,

Its an illegal clone -- Designer of the tinySA For more info go to https://tinysa.org/wiki/

I'm learning my way around the tinySA ultra and have a newbie question about generator mode. I'm trying to determine if (1) the stock antenna is suitable for testing the output when I'm in the field

I'm learning my way around the tinySA ultra and have a newbie question about generator mode. I'm trying to determine if (1) the stock antenna is suitable for testing the output when I'm in the field

Hi, I just received my tinysa ultra and I'm experiencing the same issue on test 10: signal level fail. I just came across this group and was unaware about counterfeit products. I'd like to confirm

Have you tried a different SMA jumper?? What does it do if you clear the calibration and run it uncalibrated?