开云体育

Is it possible to purchase a TinySA now?. I realize that it could be preliminary versions, but I think that all traffic in the group is too much for a very reduced group of beta

Been there, done that

???? Yep, it works now.? Thanks a bunch!? I like being able to get it on the "big screen."? These old eyes don't like that small stuff anymore.? I had to get headband-type magnifier with 5

Jim, Everything in tinysa-saver now only uses the tinysa name and (if I did not make any mistakes) you should be able to install it on your system next to having nanonvna-saver. You can also download

Hi Again I forgot to mention it was under Windows10 with Phyton 3.7 32bit //Kurt Fra: [email protected] <[email protected]> P? vegne af erik@... Sendt: 19. maj 2020 10:53 Til:

Hi Erik and others It works OK when remembering to set frequency start and stop before doing a sweep. On the TinySA the Attennuation and reference level must be set to manual in particular for

I cloned the tinySA repo, then attempted to install just as I had installed NanoVNA-Saver in the past, substituting "tinySA-saver" for "NanoVNA-Saver"? in the command.? It didn't install.? Looking

A new measurement example is added to demonstrate the dynamic range of the tinySA in measuring harmonics coming from a transmitter https://tinysa.org/wiki/pmwiki.php?n=Main.DynamicRange

For those using Linux Multiple segments is now working in tinySA-saver https://github.com/erikkaashoek/tinySA-saver The tinySA data is in the S21Gain (dB) graph. Suggest to remove all other displayed

That did it!

Cool, I'll give it a shot.? Thanks, Allison.

I used dfu-util and it worked.? Linux Mint 18.3. Command line used. $ sudo dfu-util? -a 0 -s 0x08000000:leave -D ch.bin I was going to use the ST software but due to screw up on their end

Has anybody been able to update the firmware from Linux?? I downloaded and installed the software from ST.? I have not been able to get the GUI to run at all.? I am able to connect from the

The tinySA does a double conversion with a first high IF at 433MHz for its low input IF? range (till 350MHz). Performance is more then sufficient for measuring spectral purity of HF transmitters. The

My guess would be limitations of the spectral purity of the local oscillator. (I haven't seen the hardware design.) The two ranges suggest that it works similarly to the NanoVNA: a signal source is

Hoping to shed some light on the tinySA possibilities I created a wiki measurement example on IQ balance tuning in a single side band

Implemented, see wiki

Herb, The commands you recognize are the same as the nanoVNA. The returned data per trace is only one number as the power measurement is scalar and not a vector Next to the nanoVNA level commands

======================================= I'm uncertain how the help file John posted correlates to the console commands list that Erik provided by sending the "help" console command to the tinySA. -

Focus is not exactly the?same as "ZEROSPAN". I?do plan on putting that option back. The "GRID" commands will be separate. The current structure makes the?two-word idea difficult! There are two