开云体育

I agree!? I have a spectrum analyzer that I paid enough for to buy a? case of tinySAs, and the tinySA has features the expensive SA doesn't have. Some of the features can be added to my expensive

R&L out of stock as of 12 PM CST. Steve_WB8GRS

Josh, I would agree with Shirley on the use of the TinySA.? I have been searching for a good SA since I got back into the hobby and have tried may "low cost" alternatives.? Everything from the

To look at your HF signal with an RTL-SDR you will also need a transverter (like a Ham-It-Up or a Spyverter), or an RTL-SDR dongle that has the modification to allow the use of the direct sampling

Nicely done, Erik. Thank you for all you do. It would be nice if you could bring back trace smoothing. I found it to be very useful. FWIW I was ok with space delimiting. Any modern spreadsheet can

New version uploaded. Now the tinySA range is set identical to the tinySA-App when requesting a scan. The points are NOT set For the csv I added the non-standard "sep=," pragma and changed to "," as

Josh,It depends on what you want to do with the SA. If you want to qualitatively look at narrow bandwidths this is now the tool. What is your application? Mike N2MS

Josh, You are right. As stated in the wiki the lower RBW is a limitation. For analysis of SSB signals you can use an RTL-SDR with appropriate? attenuation.

So, this may not be an appropriate forum for this question, but I had some questions on the TinySA.? As Spectrum Analyzers have been almost completely out of my price range, my familiarity with them

El 03/10/2020 a las 14:48, hwalker wrote:

Hi Erik Now it is perfect and audio sound very good in a radio. LOW OUTPUT 50MHz AM: 1000Hz=991HZ 5000HZ=4770Hz At 1000Hz modulation 32% and CCIT distortion 2.4% NFM: Audio tones spot on.

Hi Erik, I found one of this: when saving an image the file names are "tinysa_LOGMAG_S11_2020-10-03_13-27-58.png" and "tinysa_LINMAG_S11_2020-10-03_13-33-09.png" instead of "Log Power ..." and "Lin

Erik, I hope buyers of the tinySA realize the added value provided by your software, firmware and hardware support goes far beyond the purchase price of the tinySA.? I have equipment costing in

Erik, The code clean-up looks much, much better.? Confusing references to NanoVNA-App, other than appropriate credits to OneOfEleven (A.K.A Cathy), have been been pretty much eliminated. I have the

Many members of this group do have experience with spectrum analyzers before getting a tinySA, but for some the tinySA is their first spectrum analyzer. Especially for these users I made a paper

After some further cleaning (no new functionality yet) a new release of tinySA-App.exe instead of .s1p files the saving goes to .csv files. Let me know if I still missed (nano)VNA references The file

since everything (except the on/off switch) is under software control. Suggest a beginner mode, where the computer sets most values and limited menu options show. An advanced mode where it does its

Thank you thank you thank you. Going crazy, trying to do an update and getting the same error message. Downloaded the app mentioned and it worked on the first try. Name is Dave, from Marion, Iowa,

Thanks. Haven't received the unit yet. MIke N2MS

Charlie, You're right.? I got that backwards as far as making the sweep settings match.? As you said you have to set-up the range on the tinySA first and then make tinySA-App match it by selecting