John, I'm envious!? Not that I need another SA, but this is so portable and far beyond the capabilities of the original TinySA.
Dave - W?LEV
I never received a notification that mine had shipped and it showed up the other day ? My checkbook can withstand the wait...?
Dave - W?LEV
On Sun, Dec 4, 2022 at 6:19 PM Dave VE3GSO < VE3GSO@...> wrote: The first batch, both at the Zeenko store and also R&L went pretty fast.? I expect you will be waiting for the second production batch, which is probably in progress. Dave ? Yes, it's out of stock.? But some are receiving their orders.? I'm betting they are filling existing orders before listing in stock.? Hopefully I'm correct as I will be ordering as soon as R&L lists stock.
Dave - W?LEV
On Sun, Dec 4, 2022 at 6:06 PM Roger Need via <sailtamarack= [email protected]> wrote: On Sun, Dec 4, 2022 at 07:11 AM, waltcates wrote:
So sad, "out of Stock"
Here is what a member of this group posted last week on the R&l stock status...
/g/tinysa/message/8141
Roger
--
--
|
I never received a notification that mine had shipped and it showed up the other day
toggle quoted message
Show quoted text
On Dec 4, 2022, at 12:27 PM, W0LEV <davearea51a@...> wrote:
? My checkbook can withstand the wait...?
Dave - W?LEV
On Sun, Dec 4, 2022 at 6:19 PM Dave VE3GSO < VE3GSO@...> wrote: The first batch, both at the Zeenko store and also R&L went pretty fast.? I expect you will be waiting for the second production batch, which is probably in progress. Dave ? Yes, it's out of stock.? But some are receiving their orders.? I'm betting they are filling existing orders before listing in stock.? Hopefully I'm correct as I will be ordering as soon as R&L lists stock.
Dave - W?LEV
On Sun, Dec 4, 2022 at 6:06 PM Roger Need via <sailtamarack= [email protected]> wrote: On Sun, Dec 4, 2022 at 07:11 AM, waltcates wrote:
So sad, "out of Stock"
Here is what a member of this group posted last week on the R&l stock status...
/g/tinysa/message/8141
Roger
--
--
|
My checkbook can withstand the wait...?
Dave - W?LEV
On Sun, Dec 4, 2022 at 6:19 PM Dave VE3GSO < VE3GSO@...> wrote: The first batch, both at the Zeenko store and also R&L went pretty fast.? I expect you will be waiting for the second production batch, which is probably in progress. Dave ? Yes, it's out of stock.? But some are receiving their orders.? I'm betting they are filling existing orders before listing in stock.? Hopefully I'm correct as I will be ordering as soon as R&L lists stock.
Dave - W?LEV
On Sun, Dec 4, 2022 at 6:06 PM Roger Need via <sailtamarack= [email protected]> wrote: On Sun, Dec 4, 2022 at 07:11 AM, waltcates wrote:
So sad, "out of Stock"
Here is what a member of this group posted last week on the R&l stock status...
/g/tinysa/message/8141
Roger
--
|
The first batch, both at the Zeenko store and also R&L went pretty fast. ?I expect you will be waiting for the second production batch, which is probably in progress. Dave
toggle quoted message
Show quoted text
On Dec 4, 2022, at 13:09, W0LEV <davearea51a@...> wrote:
? Yes, it's out of stock.? But some are receiving their orders.? I'm betting they are filling existing orders before listing in stock.? Hopefully I'm correct as I will be ordering as soon as R&L lists stock.
Dave - W?LEV
On Sun, Dec 4, 2022 at 6:06 PM Roger Need via <sailtamarack= [email protected]> wrote: On Sun, Dec 4, 2022 at 07:11 AM, waltcates wrote:
So sad, "out of Stock"
Here is what a member of this group posted last week on the R&l stock status...
/g/tinysa/message/8141
Roger
--
|
Yes, it's out of stock.? But some are receiving their orders.? I'm betting they are filling existing orders before listing in stock.? Hopefully I'm correct as I will be ordering as soon as R&L lists stock.
Dave - W?LEV
On Sun, Dec 4, 2022 at 6:06 PM Roger Need via <sailtamarack= [email protected]> wrote: On Sun, Dec 4, 2022 at 07:11 AM, waltcates wrote:
So sad, "out of Stock"
Here is what a member of this group posted last week on the R&l stock status...
/g/tinysa/message/8141
Roger
|
On Sun, Dec 4, 2022 at 07:11 AM, waltcates wrote:
So sad, "out of Stock"
Here is what a member of this group posted last week on the R&l stock status... /g/tinysa/message/8141Roger
|
Re: New Video: tinySA Ultra observing WiFi and other networks.
you need to enable "ultra" mode in the config. It requires an unlock code available on the wiki. Easy to do
Tim? K4SHF
On Sun, Dec 4, 2022 at 12:27 PM nechry < nechry@...> wrote: hello Erik thank you for all the effort you put into the tinySA and the tinySA Ultra. I try, if possible, to reproduce your demos to understand and put into practice.
I realize that this time I can't, but I really don't understand why.
It is impossible for me to select a STOP frequency higher than 800MHz.
I updated to the latest version (tinySA4_v1.3-512) but still no possibility to set the stop frequency to more than 800 MHz.
I perform the self-test successfully and the CAL level.
In the video you said with all default config. I think I'm missing something, it's probably trivial...
If you can give me advice on what I missed. Thanks in advance
?
|
Re: New Video: tinySA Ultra observing WiFi and other networks.
hello Erik thank you for all the effort you put into the tinySA and the tinySA Ultra. I try, if possible, to reproduce your demos to understand and put into practice.
I realize that this time I can't, but I really don't understand why.
It is impossible for me to select a STOP frequency higher than 800MHz.
I updated to the latest version (tinySA4_v1.3-512) but still no possibility to set the stop frequency to more than 800 MHz.
I perform the self-test successfully and the CAL level.
In the video you said with all default config. I think I'm missing something, it's probably trivial...
If you can give me advice on what I missed. Thanks in advance
?
|
Re: TinySA Ultra screen misaligned
Ok, yes, that was too easy to fix. Also no double sided tape on mine either.
thank's for help
|
Hi Dick,
I normally just change the span around a signal to get one station expanded on the display.?
A marker will give that "frequency" and then I can figure out what local FM station is being received.
Trace -> Calc Off?--> Max Hold will average out the FM to an envelope.
(If it is an HD station, you can also see the digital sidebands.)
I hope that this helps,
Larry
|
On Sun, Dec 4, 2022 at 08:05 AM, Dick wrote:
... I scan the FM Band and get several signals.
?
How can I tell the frequency of any one of those signals ?
?
?
Like any spectrum analyzer, you have to use your markers to identify frequency peaks in a given span.? The Ultra has 8 markers you can set versus the 4 for the tinySA.?? Herb
|
Got my Ultra yesterday, from R&L Electronics, looks fine
and getting used to it.
However, I do and will have some questions on its operation.
For example, I scan the FM Band and get several signals.
How can I tell the frequency of any one of those signals ?
Tnx es 73, Dick, W1KSZ
|
So sad, "out of Stock"
--
Walt, WD0GOF, WD0GOF.COM
|
Re: Upgrading TinySA Ultra with dfu-util does not work
Barry Brown
Mountain Telecom
802-366-3060
On Dec 4, 2022 9:50 AM, "Peter Bremer via groups.io" <radio-pjb@...> wrote:
You can also see that both DFU devices reported have the same serial number, indicating it comes from the same physical device.
|
Re: Upgrading TinySA Ultra with dfu-util does not work
You can also see that both DFU devices reported have the same serial number, indicating it comes from the same physical device.
|
Re: Upgrading TinySA Ultra with dfu-util does not work
No I did not have any other DFU devices, because if i disconnect the tinySA Ultra it does not see any DFU device when starting the bat file.
When the tinySA Ultra is reconnected the bat file again reports multiple devices.
Only when calling the bat file before switching on the tinySA Ultra in DFU mode it went well.
Could it be that the factory firmware has multiple DFU devices?
|
Re: Upgrading TinySA Ultra with dfu-util does not work
On Sun, Dec 4, 2022 at 03:39 AM, Peter Bremer wrote:
More than one DFU capable USB device found!
It seems you had more than on DFU capable device active Make sure the tinySA is the only device connected in DFU mode ? --
For more info on the tinySA go to https://tinysa.org/wiki/
|
Re: Upgrading TinySA Ultra with dfu-util does not work
It looks like I first needed to start the batch file and while it said "Device will detach and attach" switch on the TinaySA Ultra in DFU mode.
Then it suddenly upgraded to 512. According 'version menu':?
toggle quoted message
Show quoted text
tinySA4_v1.3-512-gd99d679
Build time: Dec 3 2022 - 11:30:17
|
Upgrading TinySA Ultra with dfu-util does not work
If I execute the bat file DFU_LOAD_BIN.bat as indicated in the wiki, I get the following error:
C:\Program Files Special\tinySA_Ultra>.\dfu-util-static.exe? -a 0 -s 0x08000000:leave -D .\tinySA.bin
dfu-util 0.11
?
Copyright 2005-2009 Weston Schmidt, Harald Welte and OpenMoko Inc.
Copyright 2010-2021 Tormod Volden and Stefan Schmidt
This program is Free Software and has ABSOLUTELY NO WARRANTY
Please report bugs to http://sourceforge.net/p/dfu-util/tickets/
?
Warning: Invalid DFU suffix signature
A valid DFU suffix will be required in a future dfu-util release
More than one DFU capable USB device found! Try `--list' and specify the serial number or disconnect all but one device
?
?
C:\Program Files Special\tinySA_Ultra>.\dfu-util-static.exe -l
dfu-util 0.11
?
Copyright 2005-2009 Weston Schmidt, Harald Welte and OpenMoko Inc.
Copyright 2010-2021 Tormod Volden and Stefan Schmidt
This program is Free Software and has ABSOLUTELY NO WARRANTY
Please report bugs to http://sourceforge.net/p/dfu-util/tickets/
?
Found DFU: [0483:df11] ver=2200, devnum=30, cfg=1, intf=0, path="1-1", alt=1, name="@Option Bytes? /0x1FFFF800/01*016 e", serial="2058365F2039"
Found DFU: [0483:df11] ver=2200, devnum=30, cfg=1, intf=0, path="1-1", alt=0, name="@Internal Flash? /0x08000000/128*0002Kg", serial="2058365F2039"
Found Runtime: [30c9:003a] ver=0006, devnum=3, cfg=1, intf=2, path="1-4", alt=0, name="Camera DFU Device", serial="0001"
?
C:\Program Files Special\tinySA_Ultra>pause
Press any key to continue . . .
How to solve it?
|
My Ultra just has arrived!
(From R&L) I was prepared to re-align the lcd, but found mine is perfect so I can get right to the fun!
|
Roger Need
Tim K4SHF
nechry
Larry McElhiney
Dick
waltcates
Barry