Re: Would like to report a new fake chinese hardware for TinySA
I didn't see any authorised sellers on Amazon.
?
BUT!? Wait for my post shortly which will hopefully elaborate on things.
|
Re: Would like to report a new fake chinese hardware for TinySA
No I wasn't, Prawlin - FAR from it.? Watch out for another reply to this listing with my findings.
|
Re: New FW release: Corrected selftest 8
On 31/03/2025 11:02, Erik Kaashoek via groups.io wrote: New FW release
Version V1.4199
Changes:
- Selftest 8 corrected. Thanks! David -- SatSignal Software - Quality software for you Web: Email: davidtaylor@... BlueSky: @gm8arv.bsky.social, Twitter: @gm8arv
|
Re: TinySA Ultra Unresponive
|
New FW release: Corrected selftest 8
New FW release
Version V1.4199
?
Changes:
- Selftest 8 corrected.
--
Designer of the tinySA
For more info go to
|
Re: TinySA Ultra Unresponive
On Sun, Mar 30, 2025 at 12:28 AM, Liam Wescott wrote:
Something went wrong with my TinySA Ultra after I updated the firmware earlier this evening.
Make sure you are loading the correct firmware.
?
Roger
|
Re: Would like to report a new fake chinese hardware for TinySA
Peter...Sorry for the misdirection of my comment.
I was on my first cup of coffee. I'm using that as an excuse.
On 3/30/2025 9:24 AM, Prawlin via
groups.io wrote:
toggle quoted message
Show quoted text
Absolutely agree. It wasn’t me advocating reporting the
clones, far from it. ?It was Danny. ?Peter. ?
|
Re: Would like to report a new fake chinese hardware for TinySA
Absolutely agree. It wasn’t me advocating reporting the clones, far from it. ?It was Danny. ?Peter. ?
|
Re: Would like to report a new fake chinese hardware for TinySA
Prawlin...You would just be playing whack-a-mole.
It's like trying to blacklist spam IP addresses or telephone
numbers. More just pop up.
It is a pointless exercise.
Listing the authorized sources is the only reasonable way to
direct folks to a reliable source.
My 2 cents...
On 3/30/2025 2:10 AM, Prawlin via
groups.io wrote:
toggle quoted message
Show quoted text
On Sat, Mar 29, 2025 at 11:35 PM, Danny wrote:
Hello fellow amateur radio user!
?
?
All I wanted to do was to report a new fake clone which
wasn't mentioned anywhere on the site.
?
Simple as that.
?
?
Regards.
?
The rule regarding clones is very very simple. *Only* ever
buy from sellers on the ?specific recommended sellers list…….
All other sources are very likely to be illegal fake
clones. The marketplace is awash with them. There’s a couple
of approved sellers on Amazon, but loads of Amazon sellers are
not approved. Please don’t assume that the Amazon marketplace
is somehow better than EBay, Aliexpress etc etc. When you buy
on Amazon, you are generally not actually buying *from*
Amazon, just via the Amazon marketplace system. Peter
|
Re: Would like to report a new fake chinese hardware for TinySA
On Sat, Mar 29, 2025 at 11:35 PM, Danny wrote:
Hello fellow amateur radio user!
?
?
All I wanted to do was to report a new fake clone which wasn't mentioned anywhere on the site.
?
Simple as that.
?
?
Regards.
?
The rule regarding clones is very very simple. *Only* ever buy from sellers on the ?specific recommended sellers list…….
All other sources are very likely to be illegal fake clones. The marketplace is awash with them. There’s a couple of approved sellers on Amazon, but loads of Amazon sellers are not approved. Please don’t assume that the Amazon marketplace is somehow better than EBay, Aliexpress etc etc. When you buy on Amazon, you are generally not actually buying *from* Amazon, just via the Amazon marketplace system. Peter
|
Re: Would like to report a new fake chinese hardware for TinySA
But it was found on Amazon.?
but almost certainly a 3rd party seller and not Amazon itself?? Jeff
|
Re: TinySA Ultra Unresponive
Have a look here:
?
--
Designer of the tinySA
For more info go to
|
Something went wrong with my TinySA Ultra after I updated the firmware earlier this evening.
?
I get this screen when I turn the unit on and nothing else:
?
?
|
Re: Screen capture a completed selftest on ZS-407
On Sat, Mar 29, 2025 at 06:07 PM, VK3DPM Dave wrote:
Not a big deal, but I'm interested how to grab a screen capture after a completed selftest (no errors) on an ultra+. When the self test is complete it states touch the screen to exit, touching the SD icon the selftest exits also the jog button seems to be disabled until the test is exited.? I understand you can take a pic with a phone etc, just wondering if I've missed something.
Any of the screen capturing tools using a PC and the USB connection can capture the screen after running the selftest.
Example is tinySA-App, but there are more
--
Designer of the tinySA
For more info go to
|
Re: Would like to report a new fake chinese hardware for TinySA
On Sat, Mar 29, 2025 at 04:33 PM, Danny wrote:
But it was found on Amazon.? As the TinySA guys hold trademarks/copyright - that should give them more rights to get those took down.
Danny
There are so many sellers of clones on all platforms. Amazon, Ebay, AliExpress,...
That is why we don't list sellers of clones anymore. Only the safe places to buy.
--
Designer of the tinySA
For more info go to
|
Re: Enhancement Requests: File Management Sort By Name and Rename
For anyone stumbling upon this thread and wanting files sorted differently, the underlying file access is at the raw FAT. Files on the SD card aren't sorted for display, they are listed based on the order they were originally created and added to the FAT. Changing the file creation (or modification or access) date/time will not change the displayed file order.
?
To get my .prs files in the SD card to show in alphabetical order I created a powershell script to copy the files off the sdcard, delete the originals, and then copy the files back in the desired order. This process deletes the FAT entries and then recreates them.
?
Peter
|
Screen capture a completed selftest on ZS-407
Not a big deal, but I'm interested how to grab a screen capture after a completed selftest (no errors) on an ultra+. When the self test is complete it states touch the screen to exit, touching the SD icon the selftest exits also the jog button seems to be disabled until the test is exited.? I understand you can take a pic with a phone etc, just wondering if I've missed something.
?
Dave??
|
Re: Would like to report a new fake chinese hardware for TinySA
John,
?
?
I am willing to discuss the details of the clone "in-private", but Erik didn't seem interested in my attempt to report another fake clone.
?
?
Regards.
|
Re: Would like to report a new fake chinese hardware for TinySA
Hello fellow amateur radio user!
?
?
All I wanted to do was to report a new fake clone which wasn't mentioned anywhere on the site.
?
Simple as that.
?
?
Regards.
|
Re: Would like to report a new fake chinese hardware for TinySA
But it was found on Amazon.? As the TinySA guys hold trademarks/copyright - that should give them more rights to get those took down.
?
That's why I wanted to report it.
|
David J Taylor
Roger Need
