Re: Access traces from the SD card via USB cable
Thanks - I meant to put that in - Bill kindly offered to do that back in March so I put a permanent link to it in my
?
Ian
|
Re: Access traces from the SD card via USB cable
Take a look at this fork,?
?
https://github.com/cxy5014/QtTinySA
?
This person seems to building DMG's for mac that follow the official releases, I can confirm this works on a M1 running Sonoma 14.5
?
Apart from some scaling issues (I'm assuming its a retina thing) it works very well, would LOVE a 2D spectual waterful under the trace !
?
?
|
Re: fatal error after firmware upgrade
problem solved, I made very stupid mistake in the upgrade procedure.
btw, the reason for the firmware upgrade was a selftest error in step 3.
This is fixed by re-calibrating the TinySA-ultra.
met vriendelijke groeten, Gerrit
(btw2: TinySA is a fantastic tool, must have for all hammers
and compliments for the designer Erik and lots of compliments for his after sales support)
|
Re: Access traces from the SD card via USB cable
QtTinySA is written in Python and works on Linux, Windows and Mac under python.? I have no mac so cannot build executables for macOS, or test the python code there myself but I am told it works.? I test it primarily on Linux because that's where I use it, but I can also build executables on Windows 11 and do some minimal testing on 11 and sometimes on 10.? It should NOT work on Windows 7 but I have never tried it.
?
There is a wiki on the GitHub repository that describes some necessary python dependencies.
?
I am just an amateur programmer and do it to learn and for fun and because there was no Linux App before.? If @apple would like to send me a nice small mac laptop I will gladly learn how to build macOS executables on it and provide them as well as the Windows ones that I have no use for :-)
?
Ian
|
Ahh ok, , I ' ve found the menu entry? Thanks !!
Thanks Tate,? I guess your suggestion is referred to the TinySA, not the Ultra version ?
Adri
See the line says "Clear Config" here:??
Hello, I just got my new ultra and was wondering if there is a way from menu to bring it back to factory condition (?)? ?Thanks
--
Tate Belden
A jack of all trades is a master of none, but oftentimes better than a master of one.
|
Thanks Tate,? I guess your suggestion is referred to the TinySA, not the Ultra version ?
Adri
See the line says "Clear Config" here:??
Hello, I just got my new ultra and was wondering if there is a way from menu to bring it back to factory condition (?)? ?Thanks
--
Tate Belden
A jack of all trades is a master of none, but oftentimes better than a master of one.
|
Re: Access traces from the SD card via USB cable
As far as I know there is no executable for Mac, but as I have read that it is a Pyton programme designed to work with Linux, but it works under Windows and possibly on Mac.
?
Have a look on??
?
I'm not a programmer, but I think that using the libraries and mac repository of the languages used, it would work.
?
|
Re: Attenuator needed for my purpose?
Wow, I miss Don Rickles, he was the best. BTW: , Dave, I was born
the day before Ruzevelt died, guess he couldn't take the shock.
Mike C. Sand Mtn GA
(Yeah, late response, just got my computer back after a crash)
On 6/5/2024 12:22 PM, W0LEV wrote:
toggle quoted message
Show quoted text
Yes,
I once worked for?? LEC? TRO?? SON?? ICS, ? Lectrosonics, the
wireless mic. company (and more) in Albuquerque, New Mexico.?
I
always got a kick dealing with suppliers and reps, especially
those from back east.? They invariably would ask if they
needed an export license.? I fired back with, "What's between
eastern Arizona and west Texas?"? Many did not realize that
was the place of the fifth largest state in the lower 48 - New
Mexico.? And that it was, indeed, one of the lower 48.? It
always gave me a smile.
Dave
- W?LEV
I was assuming Dave meant Lectrosonics and
that was a typo.?
On
Tue, Jun 4, 2024 at 11:05 AM, W0LEV wrote:
Lectronics
Any relation to the popular wireless microphone
manufacturer who is still in business, "Lectrosonics"???
--
|
See the line says "Clear Config" here:??
Hello, I just got my new ultra and was wondering if there is a way from menu to bring it back to factory condition (?)? ?Thanks
-- Tate Belden
A jack of all trades is a master of none, but oftentimes better than a master of one.
|
Hello, I just got my new ultra and was wondering if there is a way from menu to bring it back to factory condition (?)? ?Thanks
|
Re: Access traces from the SD card via USB cable
christiantauler@gmail.com
On Tue, Jul 23, 2024 at 03:34 PM, Toni Ciscar wrote:
Christian, the QtTynySA application allows you to browse and download the SDcard files.
?
This is great. Is this available for Mac?
|
Re: Relating noise figure/noise temperature to displayed power on the tinysaultra
I've been designing and building radio telescopes, HF, VHF into the microwave, for 30 years. The TinySA Ultra has revolutionised the way I'm working. Instead of bringing the preamps, amps etc to the lab, I can go into the field and check them. By the nature of the way radio astronomers work, this piece of kit is game changing. Thank you.
|
Re: Relating noise figure/noise temperature to displayed power on the tinysaultra
|
Re: Relating noise figure/noise temperature to displayed power on the tinysaultra
If you look closely you see at the left of the screen during the measurement of the NF that the lna is enabled.
The value of 5.7 is thus only valid with lna enabled?
--
Designer of the tinySA
For more info go to
|
Relating noise figure/noise temperature to displayed power on the tinysaultra
My TinySAultra noise figure came up as 5.7dB. That's a noise temperature, T of around 750K. When displaying up to 800MHz, with 850kHz bandwidth on each point, it displays a noise level of around -90dB for each point. I'm using P =kTB to calculate the power, so P = 1.38E-23 x 750 x 850k which gives 8.8E-15 W or -110dBm. That's exactly 20dBm too small. However, when I switch on the LNA, the noise floor drops to exactly -110dBm. Should not the noise floor without the LNA switched on be -110dBm?
|
Re: TinySA Ultra "Self Test 10 Stopband Fail" , but then passes.
The only other reason could be a somewhat loose SMA connector
--
Designer of the tinySA
For more info go to
|
Re: Access traces from the SD card via USB cable
|
Re: The input impendance of tinysa ultra
I have already sent tinysa back to the seller and confirmed that the input RF switch was damaged
Now I have received it and the test results are correct
|
Re: Access traces from the SD card via USB cable
You can access images from tinySA ultra SD card with DiSlord mod of Nanovna-app v.1.1.215 and save to disc. This should work for MAC/Linux too.
?
|
Re: Access traces from the SD card via USB cable
Christian, the QtTynySA application allows you to browse and download the SDcard files.
?
|
Mike C.
WyoHam