¿ªÔÆÌåÓý

Re: No pulse on CAL when freq sweeping on signal generator #tinysa #ultra
Thanks for the answer, Richard! Indeed the SDS1000X-E does not support Bode plot. But, as far as I understood from the video in initial post, you could use Ch2 as trigger based on the Pulse High
By mirc_roro@... · #20166 ·
Re: No pulse on CAL when freq sweeping on signal generator #tinysa #ultra
Hi, The 2 channel SDS1000X-E does not support the Bode Plot, the 4 channel scope does. See page 236 of the owners manual. Press the Utility button then go to to the second page. The Bode Plot
By Richard Jamsek · #20165 ·
No pulse on CAL when freq sweeping on signal generator #tinysa #ultra
Hi, I wonder if I'm doing something wrong or my TinySA is misbehaving. I want to use TinySA Ultra to align IF transformers by? visualising the freq attenuation (bode plot) on an oscilloscope.
By mirc_roro@... · #20164 ·
Re: Turn off display
Some of the new mini-pcs have USB ports that are not powered. Joe
By Joe · #20163 ·
Re: Turn off display
Correct -- Designer of the tinySA For more info go to https://tinysa.org/wiki
By Erik Kaashoek · #20162 ·
Re: Hunting Spurious Emission at 154 MHz
I seem to recall a particular problem was cable channel 52(?) coming up in the 2 meter band. 73, Don N2VGU
By Donald S Brant Jr · #20161 ·
Re: Turn off display
Jus wondering: if you use the USB-C connection for serial isn't the battery charging? So you are not losing but gaining mAh's?
By pa3cqn · #20160 ·
Re: #tinysa #ultra Leveling TinySA Ultra with damaged LNA #tinysa #ultra
When I search for a zk10 I get all kinds off stuff also. But when I search on zk10d I get the chip. Be adware that the results differ from country to country. I tried the link also, message "oeps does
By pa3jem@... · #20159 ·
Re: #tinysa #ultra Leveling TinySA Ultra with damaged LNA #tinysa #ultra
Link definitely works in Australia, but I then tried changing the delivery address to my daughters address in USA Ma, and it then said "Page not found" You might need to have a conversation with your
By Tweeter103 · #20158 ·
Re: #tinysa #ultra Leveling TinySA Ultra with damaged LNA #tinysa #ultra
Works in Australia
By Tweeter103 · #20157 ·
Re: Hunting Spurious Emission at 154 MHz
My experience agrees with yours re MATV. I work in large stadiums, and it is unusual to monitor TV channels that should not be there "Over the Air" and indeed are not measurable when moving to
By Tweeter103 · #20156 ·
Re: #tinysa #ultra Leveling TinySA Ultra with damaged LNA #tinysa #ultra
Seller sent me same link, and i guss it does not ship to my region. Aliexpress returns 404 for me.
By morpheus · #20155 ·
Re: #tinysa #ultra Leveling TinySA Ultra with damaged LNA #tinysa #ultra
This one worked for me.
By Terry W7AMI · #20154 ·
Re: #tinysa #ultra Leveling TinySA Ultra with damaged LNA #tinysa #ultra
What can I say? For me it popped up a tiny square "blue smoke" container that amplifies radio signals. Maybe try ZK10D. The point was that a quick search will solve the problem more quickly than a
By Jim Shorney · #20153 ·
Re: #tinysa #ultra Leveling TinySA Ultra with damaged LNA #tinysa #ultra
That link works fine here in UK¡­. Peter
By Prawlin · #20152 ·
Re: #tinysa #ultra Leveling TinySA Ultra with damaged LNA #tinysa #ultra
Really?? This is what comes up: ZK10 Flashlight Box Tool Storage Case For 18650 Battery LED Flashlight 14500 Torch/Lamp Battery Charger Holder 5 Sizes Outdoor Mike C. Sand Mtn GA
By Mike C. · #20151 ·
Re: #tinysa #ultra Leveling TinySA Ultra with damaged LNA #tinysa #ultra
Type ZK10 into the search box. "Mike C. via groups.io" <mg@...> wrote: -- 73 -Jim NU0C
By Jim Shorney · #20150 ·
Re: #tinysa #ultra Leveling TinySA Ultra with damaged LNA #tinysa #ultra
Very interesting. It works for Canada. But indeed? it does not work for USA, UK, France, Spain...
By Andrew Matros · #20149 ·
Re: #tinysa #ultra Leveling TinySA Ultra with damaged LNA #tinysa #ultra
That link does NOT work. Mike C. Sand Mtn GA
By Mike C. · #20148 ·
Re: #tinysa #ultra Leveling TinySA Ultra with damaged LNA #tinysa #ultra
They are listed - https://www.aliexpress.com/item/1005008670985678.html I doubt you can use the BGA2817 instead. They have a different pinout, and the powering method is not the same either. In the
By Andrew Matros · #20147 ·