开云体育

Be sure to check the cleanliness of your ultimate 1152 MHz LO. Remember LO noise will also degrade receive performance in direct proportion to the amplitude of the noise pedestal. In addition, the

Trying to run the Windows version of the QtTinySA v1.0.2 application I get the error “No module Named OpenGL” (see image ( https://i.imgur.com/wS90Wdo.png ) ). The operating system is Windows10

*Great, and thanks a lot for fast reply :-)* **Will order ZS-407 on Monday...**

The LISTEN mode should do exactly what you request Doing the output in zero span mode will create gaps in the output -- Designer of the tinySA For more info go to https://tinysa.org/wiki

Any chance to have a analog output representing RSSI level in Zero span mode? And/or level at cursor point on analog output. Like a RF-detector, just much better since Rx bandwidth can be set and much

I measured with a Wiltron generator, Tinysa ultra 20 GHz level is -18 dB to the input, harmonic 5. Be careful, input attenuator works better at 20-30 dB and attenuation/impedance tested with network

It should work OK -- Designer of the tinySA For more info go to https://tinysa.org/wiki

Thank you for both David & Shirley for trying to assist me. But, replies are opposite & for that I'm still in controversial ! I think that the final cut judgment is by Eric, the designer of TinySA

DAB isn't all that good and was allready surpassed by streaming when introduced. AM and FM are much more reliable. DAB is difficult to receive, even in urban environments you often need an outdoor

Hi David The updated version I have promised you soon to work on, we may add some copyright notes to, although it might not help at all. At least the printed manual they attach to SA-5 look

Kurt - There seems to be no ethics with certain people when they steal the work from you and not even give credit where credit is due.? When you and I started putting this together we didn't feel

Hi AGA001 Thank you for you comment Actually I first now found out about the SA-5 and did see the TechMind video, where he show (and saluted) the contend of the printed manual, which is my manual

but: should <> will -- SatSignal Software - Quality software for you Web: https://www.satsignal.eu Email: davidtaylor@... BlueSky: @gm8arv.bsky.social, Twitter: @gm8arv

AM is important becouse it covers better and is the source for emergency broadcast communication to the general public. I find that the problem with AM is too much ownership by a handful of

That should not be an issue with any high quality power bank. The bank always starts at 5V, and will not produce any other voltage unless the device negotiates for it. The tinySA will not do that so

Thank you. Mike C. Sand Mtn GA

Not all USB-C devices can accept the large range of voltages offers by some USB chargers. I would suggest getting a charger which can ONLY output 5V - until otherwise

It's very generous of you, but I still think it's unfair to use your work without attribution. I have already expressed my disapproval on at least one Youtube channel describing the SA-5 product. The

Hello. I have Tinysa Ultra (1st hardware version), & using it as panadaptor to my ICOM7100 ...... It's built-in lithium battery is expired & I searched in my country, Iraq, for new original

Hi John No I did not know that. Well, it is kind of tribute to my work ? Kind regards Kurt Fra: [email protected] <[email protected]> P? vegne af John Cunliffe W7ZQ via groups.io Sendt: 7.