开云体育

It says so on the back beneath the name Zeenko.

Erik, How can I determine if my tinySA Ultra is a ZS406? Thanks, Mike N2MS

Hi Erik - thanks for all the hard work, much appreciated. Do these new FW upgrades that are specifically identified as being for the new ZSXXX series of analyzers also apply to the original Ultra

So measuring harmonics uses the multiband feature and span sets the measuring span around the fixed harmonics calculated from the center frequency. But after setting measure 'off' multiband is still

New FW release Version V1.4193 tinySA Ultra ZS406 Changes: - Improved level correction curves for the ZS406 -- Designer of the tinySA For more info go to https://tinysa.org/wiki

Hi. I replaced U22 with an AS179-92LF that I received from Digikey yesterday. My TinySA Ultra is now capable of calibration and passes all self-tests. I would like to thank Erik and everyone who gave

Was the older 405-model also upgraded to an IPS display, I remember talks about 1? year back, but not sure if it was effected in practise. The unit most people have is likely the old TFT LCD display

Anyone that can test which older version does not have this problem? Just to rule out I introduced a concurrency bug in some release -- Designer of the tinySA For more info go to

I have the same error on this version also tinySA4_v1.4-99-g8bfcfd7 HW Version:V0.4.5.1

i have the same orre on the latest version of TinySA firmware tinySA4_v1.4-192-g73fe677 HW Version:V0.4.5.1 2025-01-07 18:23:07: 1: (-66.8, 97976963.0) 2025-01-07 18:23:09: 2: (-65.0,

See FAQ in WiKi -- Designer of the tinySA For more info go to https://tinysa.org/wiki

And what LNA is used in TinySA Ultra? It seems mine is also out of order. It does not pass tests 10 and 14.

Which brings up a good point.? When testing for weak signals such as IMD you should first look for the strongest signal that your device will be exposed to.? That includes other signals that may be

I have this verion of TinySAUltra tinySA4_v3.1.1-0-g216dfe30 HW Version:V0.4.5.1 I created this script which use this Python class for the tinySA Ultra at

Can one of you check if old FW version has the same problem? And if not, at what FW release this problem started? -- Designer of the tinySA For more info go to https://tinysa.org/wiki

That's surprising.? Python's serial port driver is much better implemented than the one for C#.? Both NanoVNASaver and QtTinySA are robust applications using Python and I have not heard of similar

I tried to implement the same behavior using this Python script: http ://athome.kaashoek.com /tinySA /python /tinySA.py ( http://athome.kaashoek.com/tinySA/python/tinySA.py ). I created a small script

Hi: As noted elsewhere, you'll need more attenuation in a form that can handle the power. I usually start my test chain with a 50db 100 watt attenuator and then add others as needed. The neat built

Okay, again, thanks for the support.

This version uses BOE's IPS LCD. We do not sell this LCD externally yet. Please contact your supplier for support.