开云体育

Thanks for the fast reply. I use my TSA Ultra for lots of stuff, so I think I best to the update ;-) 73 de Andy

The calibration did sometimes fail to find a the correct calibration value for a level offset at 2 MHz depending on the selected RBW. If you don't measure below 2 MHz there is no risk in skipping this

Hi Erik, I see you have mentioned "sometimes".. I installed the previous update (and calibrated twice) with no issues. Can I skip this update for now ? 73 de Andy

New FW release Version V1.4192 All Ultra models Changes: - Solves a bug that sometimes causes the calibration to fail causing wrong measurements below 2 MHz -- Designer of the tinySA For more info go

I believe he's asking about how one compiles and links the code to create the executable file, using the "make" tool and a makefile. Usually the makefiles are captured in the code repository along

I’m not sure anyone has any idea what your question is - maybe be a bit clearer and we can help ?

Hi all , Could you please help me to build the program on my side ? My telegram username is "liter05x2" My gmail is "terteryanl1998@..." Thank You, Lilit

Then only replacing the microcircuit will help you, and you can describe in more detail after which a malfunction occurred so that others do not make such a mistake. вс, 22 дек. 2024 г., 06:54

Thank you for your advice. I tried resetting, replacing the cable, and cleaning the SMA connector, but unfortunately I got the same result.

The 6" will work fine -- Designer of the tinySA For more info go to https://tinysa.org/wiki

I somehow have managed to misplace the jumper cable needed to calibrate my Tinysa Ultra. The shortest ones I can find online are 6", any suggestions where to purchase a shorter one like the original

Tks, Erik. Toni

BIG NUMBER now works correctly on my ULTRA. Thank you very much, Erik! Mirek

New FW release Version V1.4191 All Ultra models Changes: - Bug solved: Big number displays wrong value After installing this FW calibrate twice! -- Designer of the tinySA For more info go to

Hi Garry, I had to bump the config and settings version due to some internal changes. And the direct and direct_lna tables indeed can be different but you should not notice this during regular

Yes, this does look like a broken switch -- Designer of the tinySA For more info go to https://tinysa.org/wiki

Erik, After updating from the 171 to 190 firmware I noticed that the correction table for direct and direct_lna were very different between the two versions. Also, I found that the 171 settings and

Thank you [email protected]> wrote:

Hi everyone, My genuine device ( https://www.aliexpress.com/item/1005004934403303.html ) is failing self-test #14. I use it all the time to coordinate microphones, intercoms, and

New FW release Version V1.4190 All Ultra models Changes: - Added a model identification to the version info screen and the info command -- Designer of the tinySA For more info go to