开云体育

Wolfgang The tinySA.exe does not automatically recognize you are using an Ultra and it does use the wrong scaling factor as herb previously explained. tinySA-App.exe should be ok though, at least I do

/g/tinysa/files/Part_1.png

The following files and folders have been uploaded to the Files area of the [email protected] group. * /Part_1.png ( /g/tinysa/files/Part_1.png ) *By:* Aleksander Shalygin

I think Herb did report this /g/tinysa/message/8521

My variant. Part 1.

For narrow FM band you can set RBW to 30 kHz.

I had the protection film at the beginning, too. But it worked. I just remembered something. Is it possible to move the calibration points for touch calibration a little bit to the middle of the

?Thanks. I forgot I’d downloaded that. It’s quite good, and it shouldn’t take too much effort to revise it to match the Ultra.

Try the attached manual. Also check out or Google for Spectrum analyzer basics books. Clyde KC7BJE

The wiki is helpful, but I think something like a Dummies book with the function tree and detailed info on each function, as well as spectrum analyzer basics, would be most welcome.

I have a minor complaint regarding the way zero digits appear in the display. Along the left side and across the bottom, 0’s do not have a slash through them, but values shown on the grid do have a

https://tinysa.org/wiki/

It is called the Wiki. KC7BJE

Erik, I'm over 75 and my memory is .... ?On the web page ( https://tinysa.org/wiki/pmwiki.php?n=Main.USBInterface) ( https://tinysa.org/wiki/pmwiki.php?n=Main.USBInterface ) it would be helpful to

Works like a charm!! There seems to be a penchant for announcing the arrival of your new Ultra. Mine arrived yesterday and I love it!!!!!!!!! Thank you Erik, ? ? ? ? ? ?larry

I just watched IMSAI Guy's video on using the SD card, and learned to click on the SD icon to save the screen. Cool! I did so, and it worked without the wrapping mentioned before. Someone will surely

I haven't been able to figure out how to save a display to the SD card. But somehow I must have accidentally done so, because when I selected LOAD BMP, there was a filename displayed. I clicked it and

Thanks, Herb. Mirek

No, accuracy is in no way impacted by the reflevel value. The attenuation level does have an impact in avoiding compression. Other than that the 120dB range of the power detector is linear within its

Looks like a scanraw conversion error by the programmer.? The tinySA uses a scanraw conversion value of -128, whereas the tinySA Ultra uses a scanraw conversion value of -174.? That's a difference