开云体育

Has anyone of you had a look at this chip from semtech? Since Si4432 has become obsolete I browsed for a chip that can take its place as a platform for RF tools. It has continous frequency span from

Erik, while I have you on the phone, can you tell me the pitch of the JST plug, that the 602540 LiPo battery has within the unit, as I have to replace mine for not holding a charge anymore? I charged

Thank you Erik. My 3 TinySA(s) thank you as well.

Indeed, one cable is the way to do it. When done right, using two cables will however not make any noticeable difference. -- For more info on the tinySA go to https://tinysa.org/wiki/

It could be done that way, but why introduce more unneeded connections that could cause problems. Anyway, the author of the TinySA wrote it that way, so I do it that way. I am sure you will really

Again, thanks Clyde for your help and see this Youtuber that caused my concern over the having to use 2 cables: " https://www.youtube.com/watch?v=6xSXPVxaJxI " He refers to same around 6 1/2 minutes

Thank you Clyde for clearing up the use of only one cable needed to carry out cal. The issue of 2 cables needed, to carry out cal, came from a 'YouTuber'.

- *LEVEL CAL* <https://tinysa.org/wiki/pmwiki.php?n=Main.CALIBRATE> is used to calibrate the power measurement levels. A new menu appears and you will be asked to to connect the low and high

Me too, even my liteVNA64, quick service, good price, and the REAL McCoy. Mike C.

What is the proper way to calibrate unit? I see one person uses one sma cable between low and high. Then, I see another person states that the unit comes with 2 cables and a barrel connector, as it is

What is the battery plug JST pitch in mm needed to match TinySA board connector? (1.25 or 1.50mm)

I would characterize that as Menu Tree as opposed to a Structure Map. Not what I am looking for. Tnx for the reply, 73, Dick, W1KSZ ________________________________ Sent: Wednesday, April 13, 2022

Thank you ________________________________ Sent: Wednesday, April 13, 2022 1:34 PM To: [email protected] <[email protected]> Subject: Re: [tinysa] Where To Purchase randl electronics

randl electronics

Hello Dick, I have updated my menu text file to the actual firmware version 1.3-347: ReadMe_tinySA_menu_V1.3-347.txt 73, Rudi DL5FA

Thank you ________________________________ Sent: Wednesday, April 13, 2022 8:45 AM To: [email protected] <[email protected]> Subject: Re: [tinysa] Where To Purchase See the TinySA Wiki:

Has anyone made a Map similar to the NanoVNA one ? Tnx, Dick, W1KSZ

See the TinySA Wiki: https://tinysa.org/wiki/pmwiki.php?n=Main.Buying Sent: 13 April 2022 16:39 To: [email protected] Subject: [tinysa] Where To Purchase A couple of members in the DX Club are

R & L Electronics. I bought mine from them. Mike N2MS

A couple of members in the DX Club are interested in buying a TinySA. What sources would you recommend that sell the "real deal", not some knockoff. Tnx es 73, Dick, W1KSZ