开云体育

THis is what I did- Larry Get the tinySA_version_number.bin file from http://athome.kaashoek.com/tinySA/DFU/ and also download from there the files with names starting with DFU (so the latest is

Version is 1.3-111-gcb2fe54. The tinySA app works great, except for the upgrading function. After selecting the file, the app puts the tinySA into DFU mode automatically, but as you can see from the

Hugen manufactures the tinySA and he leveraged his experience and production capabilities with the nanoVNA to produce it.? I suspect he will do the same thing with any larger version of the tinySA.?

I believe the new tinySa that is being built in total secrecy will arrive very soon. I'm also looking forward to it and I already have the money set aside for this new device. Let's wait patiently.

Hey Terry, what FW version do you have loaded in the TinySA (menu=CONFIG/ VERSION)? And, when connecting to the TinySA app (before you try to update) does everything work Ok, you get a sweep and can

Same situation here with the eyes. Hoping for a 4.3 inch, with side buttons, similar to the NanoVNA-F (no flimsy Jog-wheel). Also, full featured Android software (connected via OTG USB-C cable) would

I use a NanoVNA-F, with side buttons, no Jog-Wheel. I hope the new not-so-TinySA 4.3 inch version (for my aging eyes, please), will use side buttons, like the the NanoVNA-F. Having an easily

I just tried both apps on my wife's laptop with the same failed results, so it must be the tinySA itself. Is there a way to reset it to factory settings? I saw something like that in the TinySA app,

I'm not sure I understand that, but I should mention that I see that when using the tinySA app, it /automatically /puts the device in DFU mode. That works. But as you can see, it appears to be unable

"Terry Perdue" <K8tp@...> wrote: The three cryptic choices are versions of NanoVNA firmware that were included in the original version of the program written for the NanoVNA. Ignore them. The

Thanks, that got me closer. I found that when thought I copied the firmware file, I actually copied the /link /to the file, hence the .URL. Using the .dfu file you supplied I followed your

Dfu util is an alternative method, using a .bin file which name must match what is expected in the batch file that is run. The batch file calls dfu-util with the correct “switches” and the .bin is

Hey Terry, also forgot to add: you must be connected to the TinySA app before you can use the upgrade. I think that's the case but I haven't tried it before connection.

Hi Terry, see attached, re: TinySA update with TinySA app. maybe it will help. Not a complicated process. The application does it all. if you follow the steps attached. You need to have the correct

?I don’t see anything in the upgrade document about renaming any file. Can you elaborate?

dfusedemo.exe is definitely not working for me. I just tried the 'Upload' function in the tinySA app, and it's certainly not intuitive. For example, it says to 'press the Open Folder button above this

I had the same issues. I used dfu-util, a bit of a PITA but figured it out. You need to follow the how to and also rename the file to what the batch file expects. It’s a DOS based process but mine

Hey Terry, I just upgraded two Tiny SA's (one older and one the newer version) to FW 1.3.317 with no problems. I did it this time with the TinySA-app using the applications built in upgrade function.

I've downloaded dfusedemo, version 3.0.6. With it running, I connect the TinySA and put it in DFU mode, but the application doesn't find it. If it's any help, when I enter DFU mode I get the 'USB

Thank you all for the replies, especially the links in the wiki that I did not realize was populated. We designed a replacement pre-amp for the D104 roughly based on W2AEW's preamp. It contains