开云体育

Thanks for the reply. The HW version is v0.4.5.1.1.

Please let me know your hardware version or contact your supplier for a replacement.

AI suggested the following: 1. **Concurrency Issue**: In the `Loop` method, `UsbService.SendCommandAsync("data 1")` and `UsbService.SendCommandAsync("data 2")` are called without awaiting them. This

Thanks for the answer. Was hoping to leave the sa some distance and be alarmed by a beep when it captured something. Will try if the output can drive a small piezo speaker. I did notice the 'armed'

Use headphone output Let me check Indeed intentional Left status panel shows ARMED after rearming -- Designer of the tinySA For more info go to https://tinysa.org/wiki

I scratched the screen of my TinySA Ultra, and I want to buy a new screen to replace it. However, I don't know which model to buy. Anyone knows?

== ZS406, oct 21 firmware == This firmware's trigger menu has some more options than explained in the wiki: beep, interval and autosave. -Beep seems to not beep, or do you have to use headphones? Or

Use 30 dB extra attenuation between the -40 dB sniffer and the tinySA input Set LEVEL/EXT GAIN to -70 dB Use the MEASURE/OIP3 and enter the two test frequencies (in case of USB: 14245700 Hz and

Let me provide more details about my setup. I have a USBService class that manages communication with a device using a serial connection. Here’s how I create the USB connection: SerialPortStream

Firstly, 100 watts is 50 dBm, so the output power after your attenuator (50dBm - 40dB = 10dBm) will exceed the permitted 6 dBm for the TinySA. Although I would highly recommend not to exceed 0dBm at

Hi Group, I'm an Ham Radio operator and I need to mesure the IMD for the modulation in SSB. I just built a two tone generator so I can inject 700hz and 1900hz at the same time to mesure the IMD but,

thanks，erik. I got it.

Two quick things you can try.? Firstly Handshake should be None.? Secondly try a Linux machine (real, not a VM).? Admittedly it has been many years since I used Windows but for serial comms it used

Check the following: 1. The command is terminated with "\r" (i.e. "frequencies \r"). 2. After a write command, the command is echo'd and you have to handle this properly before reading the data. 3.

you are not looking in the same directory that Hugen posted, you are in the tinysa2, the old one.

Hi Richard Small world with the TinySA and the radio amateurs community! I have the previous one which is fine for what I do. All the very best for 2025 and I hope you enjoy your Ultra +. Alain

Hi, I'm writing a C# program to receive data from TinySA and analyze it. I need to retrieve data from these three commands every second: * frequencies * data 1 * data 2 The issue is that, from time

Hi Hugen... Well, I feel a right twit now (embarrassed smile).? I had been going to the wrong directory, the /tinySA/DFU one, where I should have been going to the /tinySA4/DFU one (!).? My excuse

http://athome.kaashoek.com/tinySA4/DFU/

Hey @Hugen, Thanks for trying to help by giving that link, but it is actually HTTP (not HTTPS) and I already put the link in my post, but the latest DFU file is not there.? I even looked in the