开云体育

Sure, here it comes, all? two of them. Could a Wlan leak here, I didn't see the 2.4GHz peak? at first when my PC was off. (Clock on my SA is off.) The step shows on? PC too.

Hi Leif, Think we could get a screen shot of the "step" ? -----------------------------------------From: "Leif M via groups.io" To: [email protected] Cc: Sent: Wednesday January 1 2025

I? used? a 20dB attenuator between the noise source? and TinySa.

When I was (playing) testing with my Nose source noise source and TinySA, everything was fine at lower frequencies, but when the max frequency was 5GHz, there was a 10-20dB step at 3GHz. I don't think

Robert, glad you got it fixed. Hope you have a Happy and Productive 2025!!! Best Regards.....Ted (KD7AQO) -----------------------------------------From: "Robert K3RRR" To: [email protected] Cc:

*"We don't need any stinkin' driver!"* Bravo, Ted et al! I did indeed have BOOTLOADER as a device under "Other Devices." Like a dumbass, I had believed that since Windows 11 recognized the comport

If you are using a windows computer (especially WIN 11), this might be the issue. 1) If you can connect the device to the USB port (hear the "ding"), Go into Control Panel: Hardware: Device Manager -

After putting the tinySA in DFU mode, you need to use the small icon with two up-arrows to open the firmware update window. Then see if the DFU device shows up in the drop-down list in that window. If

Hi David, Thanks for the recommendation I am trying to use your suggestion of using the app but having a problem with "No valid DFU device found." PROBLEMS UPDATING FIRMWARE ON TINY SA ULTRA Powered

Hi everyone, I disassembled the device and successfully replaced U22 with AS179-92LF. My device now passes all self-tests and calibration. While disassembling, I broke the 4-pin battery connector (2

Robert, Under Windows-10 I've been using the TinySA-app v.1.1.20.1 without any problems. Cheers, David -- SatSignal Software - Quality software for you Web: https://www.satsignal.eu Email:

THD calculates the THD of the fundamental using the harmonics as visible in the scan. There seem to be no harmonics visible in your scan -- Designer of the tinySA For more info go to

When I study the ultra with version 187, and use measure->more->THD, whatever I move the marker, the THD always 0, can someone give me some suggestions?

Yes and ultra mode is working great on the device itself… Just not working on the app… -- -.- ...-- .-. .-. .-. 73 de Robert ? K3RRR X/(Twitter) @K3TripleR YouTube.com/K3RRR Website:

Sorry, but I have to ask the obvious question: have you enabled Ultra mode?

What is currently the best way to upgrade the firmware? DFUseDemo software, or the -app? -- -.- ...-- .-. .-. .-. 73 de Robert ? K3RRR X/(Twitter) @K3TripleR YouTube.com/K3RRR Website:

That's what I have been doing and it works fine as long as the top frequency does not exceed about 850 MHz… If I tried to enter frequencies above that, the software will not accept those frequencies

Yes, It's not a cache problem. I've reported the issue months ago (link 1 ( /g/tinysa/message/18163 ) and 2 ( /g/tinysa/message/18211 ) )? , but still the same

Hi After inputting 'start' freq. (in MHz) press enter, after inputting 'stop' press enter (that's the way it works here). I use DFUseDemo software, but the -app works too. 73 de 4X1RV

Please update the firmware of tinySA ULTRA to the latest.