开云体育

Yes, this is normal. Any electronics device will emit some radiation. Try other devices. You will be suprised by the emissions from a phone, computer, keyboard, mouse, monitor, etc... Even the radio

SA Ultra shows signal at 192.100MHz. Tuned that on a radio and heard steady beeps that seem to come from the SA. when I move the radio away, they are inaudible and when I move the marker with the jog

Do you have the TinySA with the small 2.8" screen? Or the TinySA Ultra with the 4" screen? <GamzeeMakara2000@...> wrote:

Good day to all! Blind grandfather is in touch with you again. Please tell me the pins of the display cable so that I can connect a larger screen. Thank you!

Is there any pinout for monitor? How is it connected in general? TNX!!!

Try this... /g/tinysa/message/16336 Roger

Thanks to everyone for their replies. I finally was able to find the Zip file and installed it without a problem. I big thanks to Ian for all the work that has gone into this program!

Let me check. This could be a bug -- Designer of the tinySA For more info go to https://tinysa.org/wiki/

Thank you, Erik, for the document. It describes nicely the calibration procedure, which I also applied before. I see, that on page 19 it is stated that for DIRECT and DIRECT LNA can't be changed by

Thanks Erik for the explanation. I see, the observed behavior is expected and not a bug. :-)

Frank, If your tinySA Ultra is less than 30 days old and was sold by a reputable seller, then I would contact the seller about exchanging the unit.? If you have owned the unit for more than 30 days

Further analysis on my TinySA Ultra: * This is an official (no clone) TinySA Ultra, HW version V0.4.5.1.1 * Device powers up, screen works. * Can connect to serial port and enter 'version'. * Can do

The executables are stand-alone programmes and do not need an installed version of python. For Linux, extract the two files inside QtTinySA.tar.gz into a folder, open a terminal in that folder and

In the "Release" section of his GitHub repository, Ian has a zip file ( QtTinySA-Windows.zip ( https://github.com/g4ixt/QtTinySA/releases/download/v0.10.6/QtTinySA-Windows.zip ) ) containing a

Thanks. gives me something to work with and thanks for all the work you have put into this.

You first need to install python and possibly some required libraries There could be a rather large single file for use in windows that includes python -- Designer of the tinySA For more info go to

Maybe you could help me, I downloaded the zip file from GitHub but when I unpacked it I didn't find a Windows executable file. What am I not understanding? I've not used this application before. I

QtTinySA and tinySA-App are two entirely different software applications for the tinySA. If you downloaded and unachieved the? QtTinySA zip file, then running the QtTinySA.exe should get you up and

Ian, Excellent contribution to the tinySA user community.? QtTinySA already exceeds a lot of the feature set of tinySA-App.? You should be aware that the VID/PID (0x0483/0x5740) is not unique to the

Some confusion. I downloaded *v0.10.6, have all the files in a folder. so, how do I apply this update to Tiny SA app?*