开云体育

QUOTE: I dont mind buying new ones as long as they will still be available and supported without going obsolete. This is one of my concerns as well, but not for your reasons. Both the TinySA's and the

Erik, having the possibility to execute the save command (menu 9 6) on a command file (*.CMD) from SDcard, you would only need the wait command to cause a wait before executing it. Perhaps creating

Martin, My wife has worked as a RN for over 35 years.? I have to agree on the safety of life issue - I wouldn't rule out a medical malpractice case dragging the validity of use issue into a

Can you connect the cal output to a scope and enable the cal output and see if there is some output. When you connect the antenna to the RF input, do you see some transmitters? -- For more info on the

You did replaced the microcontroller?? Why? The 1.4-133 is the latest... Istvan

This rings all sorts of alarm bells with me. The TinySA is fine to assist with training, design verification and to a certain extent pre-compliance testing, but it can not in any way be considered to

Geez, this is a very serious matter that needs to be emphasized.? ? There would need to be the initial calibration certification as mentioned.? Additionally there would need to be a determination

Thanks, I have done as suggested, but I still have the same result. A bit of background: When I got the device, I ran the self-test and failed test 3, and the testing stopped there. I then realized I

config / more / clear config (1234) make calibration, and then; selftest... good, if You use the latest firmware... Istvan

Erik Hi, I have the same issue. I followed the instructions and got a message in this test that the signal level was incorrect. The same result was received with the three different cables. Thanks

This "autosave" option has been requested before but not yet implemented. I can not promise when it will be done. -- For more info on the tinySA go to https://tinysa.org/wiki/

Good afternoon. I am interested in purchasing this measurement equipment. Depending on the weight (<250gr) I can attach it to a UAV and measure radiation diagrams. It would be necessary to save a

New FW release Version V1.4140 Ultra only Changes: - Corrected the CSV output for import into IAS This change reduces the number of digits in the level output and removed a trailing space. Hope now

Can someone do some tests with the Vpp and Vrms, including when used with delta markers, to see if I did not introduce new bugs? -- For more info on the tinySA go to https://tinysa.org/wiki/

skharidehal, My background in medical equipment is limited and many years old.? I spent most of my time in the Food industry, which is similar but not nearly as stringent.? I believe you would need

New FW release Version V1.4138 Ultra only Changes: - Back button indicator? ("<-") added to filename keyboard - V unit renamed to Vrms - Vpp unit added Vpp measures the Vrms of the sine wave

20 years is well beyond what can be promised, either for life time or availability. But given the wide interest there probably will be similar low cost devices available And, given the low cost

Hello, I am trying to measure transmitted power(dBm) from my medical device in a RF enclosure at bluetooth frequency(2.442 GHz) using the ultra. This project will remain active for atleast 20 years

Good afternoon. I am interested in purchasing this measurement equipment. Depending on the weight (<250gr) I can attach it to a UAV and measure radiation diagrams. It would be necessary to save a

Okay, thanks that's all I am asking for. That this is considered to be added, as an switchable option. The main point being not to have to manually calculate it yourself. Thanks :)