开云体育

There's another way to do this that might be easier: "sniff" the receiver's local oscillator with the tinySA and calculate the receive frequency from that.? It helps if you know the first IF

I'm using the original version that I bought.

Are you running the latest firmware? The version info is difficult to read. The last picture seems to suggest the LNA is not amplifying and this will be detected with the latest FW -- For more info on

After I replace RF switch all look ok I can LevelCal not Critical level . But I SELF TEST? ?test 13 not pass.

I am able to use both my tinySA and my tinySA Ultra with Linux Mint 20.3 Cinnamon and tinySA-saver 0.2.2.? Are you using the latest version of tinySA-saver from github?

It looks like this page has moved: https://emrcorp.com/resources/?_sft_category=tech-info

WOW!

guess I should've splaineed myself more gooderer, i.e. on the "referenced" page there is a LINK < https://www.emrcorp.com/techinfo > where the page goes to 404, sometimes talking (figure of speech)

Hi Mike, Not sure what your problem is. I see only the post that was linked, no ads, no 404.

sure, after you skew down the page you'll find all sorts of ads, is that the idea? Mike C. Sand Mtn GA

Works for me. Bob

de lenk she 'b' ded, can you count 404?

/g/nanovna-users/message/20618 73 André

Larry, The topic is tuning a duplexer: You wrote: "i've done it with a TinyVNA and written it up over a year ago . My comments are all over at [email protected] " Searching for your post is made very

Hi Folks, Here are photos of the ULTRA case as provided by *spiff72* at a great price. I am very pleased with the results and will buy another! Larry AC9OX (Shows that connector protectors fit as

Absolutely. I no longer use SWR curver. The Smith Chart tells you everything you need to know and then some. SWR curves are lacking in the complex portion of impedances and circuits. The reflection in

Am 16.01.2023 um 21:36 schrieb W0LEV: Dave, there is an exception: one of the Advantest (former Takeda Riken) spectrum analysers with tracking generator (4167?) had the option of phase display and in

And once you figure out what Smith Charts display you will wonder how you got along without them. Darn useful and easy to think about. Dave

Tracking generators coupled to an SA form a SCALAR network analyzer - no Smith Charts or measurement of the complex portion of impedances. Dave - W?LEV -- *Dave - W?LEV*

With SA you measure signals With VNA you measure circuits. And then there was a tracking generator.