开云体育

See https://www.youtube.com/watch?v=VDhER1WxN6k and end of https://www.youtube.com/watch?v=ioM0Si3qI-Y in the later FW MEASURE/FM menu enables a calculation of the deviation based on the observed

Can the TinySA be used to measure the FM deviation of a transmitter? E.g. the narrow of a 144 MHz TX or the wide of a FM broadcast one? Thanks.

Ah OK, I thought that the TinySA app installed the drivers too, my mistake. The DFU drivers must be installed separately (and correctly) for this to work. Regards, Martin

Yes, it can work but only if you have the DFU mode drivers installed. Most problems trying to upgrade the firmware (using DFU or whatever) are caused by lacking this driver, that is not the normal one

Which SA program ? If it is the Tiny SA app, it has a built in upload feature you can use, which makes it all very easy. Use the button bar on the top row with the two black triangles Regards, Martin

Cable is good.? Any other ideas?

Thanks I'll try a different cable. Kind Regards, Dave Dave Reiser Phone: 301-216-5394 Mobile: 301-802-1929 Email: davereiser2outlook.com<mailto:dianna@...> 520 Russell Avenue,

I can confirm the USB cable issue, too. Yesterday, I went to update firmware using the same PC I originally updated FW with right after I got the tinySA.? I couldn't get it to recognize the tinySA

Both the USB to USB-C adaptor cables I got with my NanoVNA and TinySA were bad. I bought a few adaptor cables from a reputable seller and have had no problem with them. Zack W9SZ

i have TinySA version v-1.3-111-gob2fe54 May 15, 2021. It operates beautifully and i would like to do the firmware update.? However, I do not see the unit recognized in the DFU program.? I followed

This is the tip on my active Capacitive / resistive stylus.? It is a hard tip.? When it is on it will work on my iPad screen and my tinySA.? If it is off it will only work on the tinySA, nanoVNA-F,

The stylus I use is from an old Garmin iQue GPS device. Small and works perfectly.?Remember the old PalmPilots? One of those stylus' should work too.Just food for thought...Mike

Just to clarify my statement about not recommending a capacitive stylus... I was referring to the style with the soft/squishy flexible rubber ball shape at the end - not the hard tipped variety (if

RBW -key.

I just realized why my capacitive stylus works on both my iPad and tinySA.? Never really thought about it.? When I use it on my iPad it is on and works not when it is off.? When it is off or on it

Wish List #1 for Next Version of the TinySA? : ~~ Replaceable battery ~~ Optional Accessories such as: Metal Case for one TinySA;? and larger case for two TinySA units. SMA Adaptors of various types

I just take a #2 pencil, cut it down and shave a bit off the sides of an eraser. But then I am frugal !! 73, Dick, W1KSZ ________________________________ Sent: Friday, September 24, 2021 9:20 AM To:

For those of you looking for sylii in the US, just search amazon for "plastic stylus resistive" (or ebay or any other shopping site).? There are many options out there.? I don't think you want a

What are you using the Mechanical Pencil for on the tinySA?? Does the lead work the same as a capacitive pen on the touch screen?? I never thought to try that. ? I use an iPad tablet capacitive pen

The MF/HF/VHF, or also called the "Low", input is specified between 100kHz and 350MHz. The term MF/HF/VHF is used to distinguish with the UHF or also called "High" input, not for specification of the