开云体育

Ok , I thought 7 "was the size of the diagonal of the window (screen) . The confusion arises from the lack of the capital letter to describe the system name, indeed with *W*indows (with a capital

-- ------------------------------------------ For more info on the tinySA go to https://tinysa.org/wiki/

Realy, what software are you using on Android ? Regards Patrice. Le dim. 31 janv. 2021 à 00:19, John Cunliffe W7ZQ <n2nep@...> a écrit :

I bought a 7 inch windows tablet for 48 bucks in China and it works great with the tinysa. Found it on Aliexpress.

According to this note https://www.richardsonrfpd.com/docs/rfpd/an60.pdf They are compatible -- ------------------------------------------ For more info on the tinySA go to https://tinysa.org/wiki/

Thanks for the quick response and your efforts on this cool project. ?PE4312?looks to be a drop in replacement I will swap it out and report the results. 73 Brad

Well I returned my clone unit to the Ebay seller ideafoxtrot. Got fully reimbursed and ordered another unit from R&L Electronics (verified supplier) and received the unit yesterday. Performed the self

10dB for short time is ok. Yes. Replacing the PE4302 should solve it Look at the data sheets if the replacement is compatible -- ------------------------------------------ For more info on the tinySA

It past all test with previous version of FW. ?Don't think I have any source over 10dBm that is the limit correct? ? ESD? ? would replacing the attenuator chip solve the issue? ?would the PE4312C

If it previously passed all tests with v1.1-77 FW it suggests you have destroyed the attenuator????? -- ------------------------------------------ For more info on the tinySA go to

Had been passing all tests now fails attenuator, this is confirmation of an error in the attenuator chip correct? ?I have contacted R&L not sure the return period. ?If I am out of luck could I just

Actually I forgot about maximum calibration out power level, that is true. Nice hint about MCU pins, thanks!

Can I ask all other buyers from AliExpress that got a clone to start a dispute if they did not yet? If you did not yet received formal confirmation from me, send me a private message with a photo of

The SW is open source. See github The pulse out at the high connector will be at most -25dBm so yes, it can be implemented, but will be difficult to use. Better use the two unused MCU pins (A9 and

As good as new! I was sure I tried that, but I must have been tired or something. Thanks again for a great product and great support... M

Hi, is it possible? For instance if we do frequency sweep in Low Out mode it could be handy to have a pulse out of High channel at the beginning of each cycle.

Hi, I feel badly for people who were ripped off by the sale of fakes. It makes me afraid to buy anything from the 'offshore' sellers. At the same time I feel very lucky. I ordered my first SA through

Aliexpress confirmed counterfeit, refunded purchase (without return), and took down the sellers listing.? Looks like they shut down the seller altogether, no items listed in their store.? Thanks

Hi Clyde, Do you have a link for the metal NanoVNA-H case?? Also, where is this "mod section" you mention?? Not on this forum that I could find. Wondering if the metal case really helps anything

Thank you Jim!