None of the instructions for firmware updating are either understandable or workable.
The first approach was to use the instructions for?Updating the firmware using a bin file and STM32CubeProgrammer(Windows) unfortunately the link is dead.
Next:?Updating the firmware using a bin file and dfu-util(Windows, Linux and Mac) I downloaded the bin file and renamed it to tinyAS.bin. However the step "Download dfu-util from http://dfu-util.sourceforge.net/releases/ and check you can execute it" is meaningless.? I downloded dfu-util-0.11.tar.gz?but none of the files contained in it are executable. Likewise?DFU_LOAD_BIN.bat cannot be run on Windows 11 due to security issues.
The step "
The tinySA should now be updating with the tinySA.bin file using dfu-util-static.exe" does not work because dfu-util-static.exe does not execute.
I then copied the first command from the bat file and ran it in a Windows command window:
C:\Users\User\Downloads>.\dfu-util-static.exe? -a 0 -s 0x08000000:leave -D .\tinySA.bin
dfu-util 0.9
?
Copyright 2005-2009 Weston Schmidt, Harald Welte and OpenMoko Inc.
Copyright 2010-2016 Tormod Volden and Stefan Schmidt
This program is Free Software and has ABSOLUTELY NO WARRANTY
Please report bugs to http://sourceforge.net/p/dfu-util/tickets/
?
Invalid DFU suffix signature
A valid DFU suffix will be required in a future dfu-util release!!!
Cannot open DFU device 0483:df11
No DFU capable USB device available?
I then Googled tinysa firmware update and found the YouTube by Lockdown Electronics. This looked promising until discovering that dfuse demo is no longer available. All links go to STM32CubeProgrammer and the instructions are no longer valid.
I tried a few more YouTube video and gave up after about three hours of useless effort.
Are there any instructions for firmware updating that are relevant and understandable for Windows 11 in March 2022?
?
