开云体育

Hello everyone! I've been running the EchoLink and IRLP newsline server for more years that I can remember. I retired last and now that I'm living on my savings and social security I need to

You're welcome.? I didn't do much, but looks like it was a minor configuration error that confused tlb.? Commenting out the offending line did the trick. For everyone else following, don't use a

I want to thank Tony for his help, the system is now working very well, thank you. As we say here in Mexico "he who knows, he knows..."

Tony Ok, let me know what do you want to do, no problem with access or anything you need. XE1E? Enrique.

I'm at the point where I'd need to examine your system in detail.? I've covered everything I can think off, but without being able to interactively run tests and examine traffic, it's very hard to

No firewalls in the path. All open. Do you think it may be a port problem? Why RTP yes and SF not work?? Sorry for the question, but I don?t know much about this. XE1E? Enrique.

Hmm, I've never seen this level of stubborness.? Are there any firewalls enabled in the path between the nodes? -- 73 de Tony VK3JED/VK3IRL http://vkradio.com

Tony Changed RTP_Pass = !? but the problem stays on. All behavior as described. XE1E? Enrique

OK, let's do a test and set RTP_Pass = ! Let's see if that makes everything work.? Make that change, restart tlb and let me know if that fixes your problems. -- 73 de Tony

Tony Yes TLB is exp0114 IRLP experimental node, my idea is only interconnect ASL to IRLP. Echolink and M17 are connected via one ASL node and DMR via another ASL node with DVSwitch and RF ports, all 3

If this is an experimental IRLP node, try setting RTP_Pass = !?? # yes that is an exclamation mark, not a typo, and this is a comment. This disables any access control on the Speak Freely ports.?

As I said yesterday, that's not correct (certainly in my experience), but you do want this set to 0 to avoid echoing from multiple audio paths between some endpoints.? So yes this is the correct

Yes, ConfEnable is set to 0 Latest news:? Only works OK betwen connections via RTP, I?m testing two ASL connections via RTP and all is OK, the problem appears to be Speak Freely

Is tlb an experimental IRLP node?? I need to know more about the system, as I have other ideas as to what might be going on. -- 73 de Tony VK3JED/VK3IRL http://vkradio.com

ConfEnable=0 ? ?make sure that's set properly. ?If it's not, ?it won't transcode codecs

I already achieved the connection between HamVoip and TLB without connection to Echolink, but the problem continues. IRLP nodes can connect without problem but they do not listen to each other, they

It should be possible to do what you want.? However, your mileage may vary with AllStar and chan_RTP.? I have had various issues - some seem to be bugs, others seem to be implementation details on

I've had issues with that directive in the past (on some systems tlb would crash if set), so there's likely bugs there.? I normally set LoginInterval = 0 to stop logins to the Echolink servers.? If

Tony Yes only software ports. My idea is to use TLB to link IRLP with ASL, Echolink link it through Allstar's Echolink channel. Is it possible to do this? Radio ports are in the Allstar node. XE1E?

Something else I'm noticing, when I put EcholinkEnable = 0 in tlb.conf I can't make a connection between Allstar and TLB, the connection fails within 10 seconds, with IRLP without problem, is this