开云体育

I am unsure as to why, but the math input for "Add Text label: math input" appears unable to handle UEB Technical. For the quadratic formula ({-b ± sqrt{b^2-4ac}}/{2a} in ascii math in brailleblaster) The correct UEB Technical out put is (in ascii since I am too tired to grab unicode): ;;("-b_6%b9#b"-#d;ac+./#b;a) From Mathtype -> TactileView I get "<-b_6sqrt"<;b`5#b-#d"9;ac">">_/"<#b"9a"> I verified with Wolfram Alpha that the equation typed into MathType was correct. I get a similar problem with y= {x+3}/{2z^2} Correct UEB: ;;;y "7 (,x"6#c./#bz9#b);' Output from TactileView: ;y "7 "<;x"6#c">_/"<#b"9;z"`5#b> Best Ryan — — — — — Michael Ryan Hunsaker, M.Ed., Ph.D. (he/him) Teacher for Students with Visual Impairments Davis School District Braille Certifications: NLS-LOC Certified Literary UEB Transcriber RIDBC Certified Technical/Math UEB Transcriber Screenreader Certifications: NVDA Certified Expert JAWS Certified ZoomText Certified Dolphin SuperNova Beta Tester Current Relevant Projects: DAISY Consortium eBraille Steering Committee (ebraille specification link) DAISY Consortium eBraille Tactile Graphics Task Force Liblouis and Liblouisutdml development PreTEXt Development --- CALENDAR: Book a 30-minute content or technology consultation with Ryan Hunsaker Calendar (as html): Click Link to Open as HTML Calendar (.ics download): Click Link to Download ics File CONTACT I will reply to email communication between the hours of 7:15-15:00pm MST All correspondence should be sent via email or Teams Email Address: ryhunsaker@... Locations: Sunburst Elementary VISTA Education Campus —————————————————————————— FERPA/HIPAA CONFIDENTIALITY STATEMENT Please keep in mind that communications via email over the internet are not secure. Although it is unlikely, there is a possibility that information you include in an email can be intercepted and read by other parties besides the person to whom it is addressed. The contents of this email message and any attachments are intended solely for the addressee(s) and may contain confidential and/or privileged information and may be legally protected from disclosure. If you are not the intended recipient of this message or their agent, or if this message has been addressed to you in error, please immediately alert the sender by reply email and then delete this message and any attachments. If you are not the intended recipient, you are hereby notified that any use, dissemination, copying, or storage of this message or its attachments is strictly prohibited. Book time to meet with me

Is there any particular reason TactileView is sticking with MathType instead of moving toward an option like MathCAT for math rendering/input. MathType is an unnecessary expense for a lot of people and, frankly, MathCAT pretty much covers the breadth of math needs for all but he most extreme use cases, and even then it is easily tooled to meet those needs. Best Ryan — — — — — Michael Ryan Hunsaker, M.Ed., Ph.D. (he/him) Teacher for Students with Visual Impairments Davis School District Braille Certifications: NLS-LOC Certified Literary UEB Transcriber RIDBC Certified Technical/Math UEB Transcriber Screenreader Certifications: NVDA Certified Expert JAWS Certified ZoomText Certified Dolphin SuperNova Beta Tester Current Relevant Projects: DAISY Consortium eBraille Steering Committee (ebraille specification link) DAISY Consortium eBraille Tactile Graphics Task Force Liblouis and Liblouisutdml development PreTEXt Development --- CALENDAR: Book a 30-minute content or technology consultation with Ryan Hunsaker Calendar (as html): Click Link to Open as HTML Calendar (.ics download): Click Link to Download ics File CONTACT I will reply to email communication between the hours of 7:15-15:00pm MST All correspondence should be sent via email or Teams Email Address: ryhunsaker@... Locations: Sunburst Elementary VISTA Education Campus —————————————————————————— FERPA/HIPAA CONFIDENTIALITY STATEMENT Please keep in mind that communications via email over the internet are not secure. Although it is unlikely, there is a possibility that information you include in an email can be intercepted and read by other parties besides the person to whom it is addressed. The contents of this email message and any attachments are intended solely for the addressee(s) and may contain confidential and/or privileged information and may be legally protected from disclosure. If you are not the intended recipient of this message or their agent, or if this message has been addressed to you in error, please immediately alert the sender by reply email and then delete this message and any attachments. If you are not the intended recipient, you are hereby notified that any use, dissemination, copying, or storage of this message or its attachments is strictly prohibited. Book time to meet with me

Hi all. I apologise, Please use this version for Round 1 beta testing. If you have already installed the previous version, please uninstall it. TactileViewInstall_25102.zip Please let me know if you have any issues with the installation and setup wizard. Thanks and happy testing Andrew Andrew Flatres Product Manager – Braille Products Certified Product Manager Russell Smith House 2 Bullmatt Business Centre Northampton Road, Rushden Northamptonshire NN10 6AR T. +44 (0) 1415 307 577 ext. 391 m. +44 (0) 7827632615 www.humanware.com ........................................................................................................................................................................ HumanWare see things. differently This email contains privileged or confidential information and is intended only for the named recipient. If you have received this email in error or are not a named recipient, please notify the sender and destroy the email. Thank you for preserving the environment by not printing this e-mail.

I'm trying to create graphs for science. When selecting the coordinate system (no functions) tab, this allows me to insert a basic graph but it doesn't allow me to change to landscape. Not sure if this was possible with the previous version. I inserted the graph. It was only in portrait, fused it to bitmap, and then tried to change the view to landscape. It would be useful if there is a way to create graphs by adding or eliminating rows/columns.

Hello. I have an issue to report. Tactile View isn’t recognizing my printer, the APH pixblaster even though it’s on the list. I have my embosser turned on and attached to my computer via USB. I checked on my computer and the drivers are installed. Thank you! Warm Regards, Destiny Simms Instructional Technologist Hadley 700 Elm St, Winnetka, IL 60093-2554 Https://www.HadleyHelps.org Direct: 847-784-2847 Efax: 847-386-5414

Hi Andrew, I did a little testing today after updating to the newer of the two BETAs you sent out. I found three small bugs, screenshots are attached. In the configuration wizard, on step 3 you can not access the Alignment Fram Settings When opening TactileView the Grid does not default to fill the page, and when adjusted, TactileView does not remember your changes after closing and re-opening it The icon in the top toolbar for what type of grid you are using used to have the currently selected one highlighted, it does not. Additionally, it used to be that if you clicked on the selected grid type, it would turn the grid off, but now if you want to use no grid, you have to go into the grid settings and turn if off there. Best regards, John John Taylor | Products Specialist Sterling Adaptives 415-878-2922 ext 105 541-231-3920 john@... www.sterlingadaptives.com 541 Farmers Ln, Santa Rosa, CA 95405PRIVILEGED AND CONFIDENTIAL: This message and any files transmitted with it may be proprietary and solely intended for the use of the individual to whom they are addressed. If you are not the intended recipient, any use, copying, disclosure, dissemination, or distribution is strictly prohibited; please notify the sender and delete the message. Sterling Adaptives accepts no liability for damage of any kind resulting from this email.

Installed Beta version ok. On the View Menu... Previous versions had a tick beside the options that have been selected when producing a diagram - this does not happen when Show Braille Grid/Show Measurements Grid have been selected. Also the Show Alignment Frame is not an option here for some reason.

Hello Beta team I am hoping that you have all managed to install the latest beta build and had some time using it. Have only received feedback from one person and am interested in hearing everyone else installation experience and current workflows. Please also take this opportunity to let me know what you would like to change. I hope to hear more feedback in the next few weeks. Thanks Andrew Andrew Flatres Product Manager – Braille Products Certified Product Manager Russell Smith House 2 Bullmatt Business Centre Northampton Road, Rushden Northamptonshire NN10 6AR T. +44 (0) 1415 307 577 ext. 391 m. +44 (0) 7827632615 www.humanware.com ........................................................................................................................................................................ HumanWare see things. differently This email contains privileged or confidential information and is intended only for the named recipient. If you have received this email in error or are not a named recipient, please notify the sender and destroy the email. Thank you for preserving the environment by not printing this e-mail.

Hello, when submitting bugs, do we just send to the general [email protected], or is there a different channel I am missing? I had a few bugs right out of the gate after the installation of the new BETA. 1. the installer forced me to remove the old version with no option to install it along side my current version. 2. When activating via the configuration wizard, if I choose to activate for all users, TactileView hangs, and I had to close re-open, and activate for current users. Screen shot of hand attached. 3. Again from the configuration wizard, when selecting my braille table, it popped up and error message saying, "Please select a valid LibLouis table or the Japanese Braille table 'Extra’.” The option to even choose Japanese braille to then select one was greyed out and unavailable. I had to close TactileView from the task manager because I could not pass the error code to get back out. A screenshot of the error is attached. Best regards, John On Dec 9, 2024, at 8:33 AM, Andrew Flatres via groups.io <andrew.flatres@...> wrote: Dear beta tester, I am happy to announce we have our first beta version to cycle. This version 2.5.1 includes various fixes and improvements. Please note that you can install the new beta version while also having use of the current release build. I would like to encourage you all to start using the beta build in your production areas, and in the event, that it fails to do something as before please report it. One of the main objectives with this upcoming version is stability so please ensure to keep all feedback and bugs reported through the TactileVIew groups.io channel. Download the beat version from the following link. You will need to extract the file and run the application file to start the installation. To ensure you have successfully installed the version, you can simply visit the About options within Tactileview and confirm it states version 2.5.1.02. <image005.png> TactileViewInstall25100.zip At any time, you divert to using the current release version if the current beta version is experiencing difficulties trying to accomplish the task at hand. Both versions can be used side by side avoiding any further delay in your production. I have attached the release notes for further review but in summary, this version includes: Braille after ink printing mode – This enhancement allows you to print and emboss on the same sheet for those that do not have a two-in printer/embosser. This is a brand-new enhancement, and so further testing is required on this. For this to work, you will need to have a printer and an embosser that shares the same paper size. For example, Index Everest can handle A4 sheets of paper. Would not be compatible with tractor-feed embossers. Improved Polygon and curve tool – We have introduced various methods of creativity on the Polygon and curve tool. UEB integration in equation editor and graph creator tool – Would appreciate testing in this area amongst our braille math gurus put there. Any problems please do not hesitate to contact me. Happy testing! Thanks Andrew Andrew Flatres Product Manager – Braille Products <image001.png> Certified Product Manager Russell Smith House 2 Bullmatt Business Centre Northampton Road, Rushden Northamptonshire NN10 6AR T. +44 (0) 1415 307 577 ext. 391 m. +44 (0) 7827632615 www.humanware.com ........................................................................................................................................................................ HumanWare see things. differently This email contains privileged or confidential information and is intended only for the named recipient. If you have received this email in error or are not a named recipient, please notify the sender and destroy the email. Thank you for preserving the environment by not printing this e-mail. <image002.jpg> <image003.jpg><image004.jpg> <TactileView V2.5.1 Release notes.docx>