Am looking for the 25-pin DSUB alignment cable that goes with Vertex FIF-12 programmer and CT-49 alignment software. Have the FIF-12 interface and frequency programming interface, but not this cable. The part number above is a Motorola replacement part number, but not clear if the connector on this cable is small DIN-type or larger DIN-9 (older part number was AAF26X002). My FIF-12 uses smaller connector similar to later PC-keyboard so I'd need the smaller DIN connector cable for that one. I also have a FIF-8 programmer but no alignment cable for that one either (believe this is Vertex cable CT-88 and it uses the larger DIN-connector). Not sure if CT-49 software would work with this older interface even if I had the cable, but VX-5500 radios are sitting in the garage waiting after re-writing the code to get them down to ham frequencies, so any help to finish the job and get them tuned up would be appreciated!
