开云体育

At 15:10 4/18/99 -0500, you wrote:

From: Brent DeSalvo KF4TNP <Bug1@...>

i have installed the TS-64 tone board into my ge master II base and it
will now incode an deccode but it says something about the reverse burst
and that it will eliminate the squelch tail by dropping the pl first
(when the radio is in enc/dec)
but have no such luck and when connected correct it goes inline with the
ptt line and it works great that way that is it keys but than no audio
or my curtious beep passes at all .. any info on this as to what i may
have done wrong

Com Spec makes an interface board for the TS-64 that will plug directly
onto the factory GE pins. No mess or fuss.

Justin and Kim Reed
NUJQ and KBNTH
910 N. Argyle
Minneapolis, Kansas 67467

e-mail: jreed@...

The N0UJQ Homepage

i have installed the TS-64 tone board into my ge master II base and it
will now incode an deccode but it says something about the reverse burst
and that it will eliminate the squelch tail by dropping the pl first
(when the radio is in enc/dec)
but have no such luck and when connected correct it goes inline with the
ptt line and it works great that way that is it keys but than no audio
or my curtious beep passes at all .. any info on this as to what i may
have done wrong

Brent,
Your post is a little hard to follow, but can you get the
ts-64 operating properly *without* the reverse burst
feature?? I would try it without and see how you like it
(crash!).
73,
Mike, WB6CSH

From: Brent DeSalvo KF4TNP <Bug1@...>

i have installed the TS-64 tone board into my ge master II

base and it

will now incode an deccode but it says something about the

reverse burst

and that it will eliminate the squelch tail by dropping the

pl first

(when the radio is in enc/dec)
but have no such luck and when connected correct it goes

inline with the

ptt line and it works great that way that is it keys but

than no audio

or my curtious beep passes at all .. any info on this as to

what i may

have done wrong

Mike Yes i can it works ok takes about 1 sec delay on the ptt to ket the repeater
but yes it works ok and the squelch crash at the end is nuts

Mike Hamann wrote:

From: "Mike Hamann" <wb6csh@...>

Brent,
Your post is a little hard to follow, but can you get the
ts-64 operating properly *without* the reverse burst
feature?? I would try it without and see how you like it
(crash!).
73,
Mike, WB6CSH

From: Brent DeSalvo KF4TNP <Bug1@...>

i have installed the TS-64 tone board into my ge master II

base and it

will now incode an deccode but it says something about the

reverse burst

and that it will eliminate the squelch tail by dropping the

pl first

(when the radio is in enc/dec)
but have no such luck and when connected correct it goes

inline with the

ptt line and it works great that way that is it keys but

than no audio

or my curtious beep passes at all .. any info on this as to

what i may

have done wrong

------------------------------------------------------------------------
You can now easily share photos and documents with your fellow list members

Check out our homepage for details on how to use our new shared files feature!
------------------------------------------------------------------------
This list is sponsored by the owners and users of "RBTIP"

--
Brent DeSalvo (KF4TNP)

ICQ UIN# : 17430698
Mailto:bug1@...