Tait TB7100 Vhf connection to the RB-USB RIM "Lite"!
开云体育
Hello everyone,
i am trying to programm my TB7100 Vhf to worked with Scott RB-USB RIM "Lite".
Anyone has done it and if so maybe he could share the file of this repeater or
just a picture where i should go to set it up!
i am almost ok,my AllStar 2.0 is transmetting but it does not hear me but first i need to be sure the Tait is ok!
thanks in adavance for your help,
it will replace a simplex node here.
73/s
Gervais,ve2ckn
|
开云体育
hummm
many email ago someone tolded me that i add to used a Jumper on the repeater board when you are in "programmation" ,,,anyone remember what was that jumper???
i am still searching where is that DB25 pinout in the software!!!
i am almost ok,,,i have tx and audio when Allstar is starting but i am not heard by the Allstar audio,,,
gervais,,
De : [email protected] <[email protected]> de la part de Gervais Fillion via groups.io <ve2ckn2@...>
Envoyé : 13 avril 2025 19:38 ? : [email protected] <[email protected]> Objet : [repeater-builder] Tait TB7100 Vhf connection to the RB-USB RIM "Lite"! ?
Hello everyone,
i am trying to programm my TB7100 Vhf to worked with Scott RB-USB RIM "Lite".
Anyone has done it and if so maybe he could share the file of this repeater or
just a picture where i should go to set it up!
i am almost ok,my AllStar 2.0 is transmetting but it does not hear me but first i need to be sure the Tait is ok!
thanks in adavance for your help,
it will replace a simplex node here.
73/s
Gervais,ve2ckn
|
Gervais Fillion