¿ªÔÆÌåÓý

  1. Repeater-Builder
  2. Topics

Radius speaker and housing wanted

 

These are for repeater projects; actually link radios. I ran out.
--
Regards, Karl Shoemaker
To contact me, please visit SRG's web site at?
for the current email address.
-
 

Not sure what you need. I have a bunch of old Radius stuff, let me know what you need. Jim N5VGQ
 

I was trying to figure out how to post a picture. Try this.
--
Regards, Karl Shoemaker
To contact me, please visit SRG's web site at?
for the current email address.
-

RadiusSpeaker.jpg

 

I have several Radius (1225) type speakers that have distorted sound due to the environment they were in (humid) dusty, or over driven, etc., so have resorted to using the external speaker output on them, which has the added benefits the Motorola external speakers sound much better then even a working elliptical in the Radius, and the speaker can be better placed.

MBTSN6031A or others


However you do need the special connector for the back of the transceiver. Here is one


Hope this helps.

Jeff
NZ2S
 

I hae a 1/2 dozen or so from M10s I think. I'll look later today.
--
Oz (in DFW) N1OZ
 
Edited

What I have are from GM300s.? All but one had the speakers robbed for a guy that flaked.? I've not spotted the box of speakers yet.

--
Oz (in DFW) N1OZ
 

Thanks, guys for the input. I checked and determined I need the Radius M120 front panel. It can be empty, but the speaker would be nice. I don't need any of the electronics (as shown in the one image).? Please see my web site for my current address to reply to. (thanks).
--
--
Regards, Karl Shoemaker
To contact me, please visit SRG's web site at?
for the current email address.
-

m120.jpeg
M120_faceplate.jpeg

 

I have a bunch of these as well as M100s, SM50s, and some GM300s (that are all working except one with a broken?DC connector).? Almost all are UHF.? Only catch is you have to take the whole radio.? Make me a decent offer and I will be happy to ship one or more out to you.? I can get you a count on how many I have of which type on Thursday.? While I would like to recover the space they are taking up I am not giving them away (yet).? It is getting to the point where I have a larger radio fleet than some smaller cities so I should probably start thinning the herd a bit.? If anyone needs any 800 MHz LPE-200s I have a pile of those also.

Thanks,

Dan Woodie, CETsr
KC8ZUM

On Sun, Dec 20, 2020 at 11:17 PM SRG <srg734@...> wrote:
Thanks, guys for the input. I checked and determined I need the Radius M120 front panel. It can be empty, but the speaker would be nice. I don't need any of the electronics (as shown in the one image).? Please see my web site for my current address to reply to. (thanks).
--
--
Regards, Karl Shoemaker
To contact me, please visit SRG's web site at?
for the current email address.
-

 

Sounds good, Dan and send me an email please, remember the only good address is the one on the SRG web site as I don't get emails from the Group.
--
Regards, Karl Shoemaker
To contact me, please visit SRG's web site at?
for the current email address.
-
skipp025
 

> Sounds good, Dan and send me an email please, remember the only good
> address is the one on the SRG web site as I don't get emails from the Group.
> Regards, Karl

Don't hold your breath... most of the time, Karl doesn't answer Emails sent to
any address he provides. Been like that for the 15 plus years I've know him...
It's a common Northwest Left Coast thing...

cheers,

Kabigon ?
 

Not so, skipp. If you read the signature and visit the web site my current address is always listed there, under "contacts".? Of course you would have to make the effort to do this which could cost you about 3 more clicks on your mouse if you can afford that :)
--
Regards, Karl Shoemaker
To contact me, please visit SRG's web site at?
for the current email address.
-
 

Hi Karl,
Just found a pristine radius housing with speaker if you are still looking for one.
Mike VE7SML
 

Yes, Mike, what's your email or phone number?? If you don't wanna post it, look me up on email (site below)(thanks)
--
Regards, Karl Shoemaker
To contact me, please visit SRG's web site at?
for the current email address.
-
 

Mike, Hopefully you are still on this thread. I have no heard back on the email (per the web site).
--
Regards, Karl Shoemaker
To contact me, please visit SRG's web site at?
for the current email address.
-
 

Hi Karl,
I sent a reply.... about $25 for shipping to the USA. Will send Canada Post . Etransfer $$ once I have shipped
the unit and have receipt from the Post Office and can tell you the exact amount.
Mike VE7SML
 

Sounds good, Mike but I did not get a reply. I take it you did go to the web site to see my current email address?? Link below in all my signatures.
--
Regards, Karl Shoemaker
To contact me, please visit SRG's web site at?
for the current email address.
-
 

MIke, I just send you email but wanted to post here (as backup) that I'm headed to the Post Office this morning. If that does not work call me.
--
Regards, Karl Shoemaker
To contact me, please visit SRG's web site at?
for the current email address.
-

1 - 17 of 17