Have Problems i have obtain another GE Mater II UHF repeater
and it is
dead !!!!
i have check the 10v regulator card in another repeater and
it works
great i have found out that the control board does have 13.8
volts
applied to it probing at the orange wire and found a problem
the Red
wire on the control board harness is dead i believe this is
the 10v am i
correct ... i have also checked lug terminal #9 10v on the
back of the
repeater and it is good 10.1volts but somewhere in between i
lost 10
volts any ideas to what may be the problem or how to approach
it
--
Brent DeSalvo (KF4TNP)
146.625- 442.100+
Lewisburg, Tennessee
Do not forget to Confirm your visit! Thanx.
