开云体育

Channel selection on my MSF5000 station is easily accomplished from the from panel, but that does not seem to be the case on a Quantar.? How is it done?

?

Thanks!

Jeff KC8VFN

Wire a 16ch BCD switch to inputs 1 through 4 on the 50 pin and I forget if the switch grounds them or if you pull them high but I can check if needed. Then you need some wildcard instructions to tell the station to switch to a particular channel when the inputs change state. Then program the station with different channels and you can change frequencies or change power levels, PL tones or anything you can dream up. You can select up to 15 channels.

Or you can buy the Northcomm plug in controller and select up to 15 channels remotely via DTMF. https://northcommtechnologies.com/collections/quantar-external-control-module/products/quantar-external-control-module