开云体育

If you're able to connect to the same network with a laptop or cellphone, there are numerous network scanning apps that will list what's currently on your network. If the node has a static address,

I was afraid of that...IIRC it is set to STATIC...guess I need to take it home and put it on the monitor /keyboard there [email protected]> wrote:

Possible but you would have to come up with a massive liability insurance policy...they are not cheap to maintain...especially if it needs to be painted or lit day/night if over 200ft) I was lucky

Chris, If you connect it to a router that issues IP addresses (DHCP server) it *should* acquire an IP address that could be seen by looking in the router's DHCP table. If it was set for a static IP

I found my RIM RLC USB FOB.....but I cant remember what the ip address is on the Pi....I dont have a monitor handy (Im at the tower site now),,is there a way to determine it from the ETH connection?

bring buckets of $$. Tower maintenance and insurance will? eat your lunch. The kooks trying to climb and jump off the tower, people claiming you are irradiating their unborn, etc. Headaches GeorgeC

Well, we avoided it, were talking to Crown, ATC, etc. But they I showed how much revenue we were getting from our towers by leasing space. The sale idea went away. The best tenants were the FBI. Thay

George, I think that the idea of selling the tower to another company is to insulate the company that sells the tower from all the liability. Where before you had this tower and all this liability,

I appreciate everyones input. Lots of good information & lessons learned from your experiences. Let me throw another idea out here. Im not saying this is an option for myself. Just brainstorming.

Before I retired I was Director of Engineering for a large group of TV stations. Towers were my responsibility. I can tell you that as much as I wanted to get hams on our towers my hands were tied by

The ability to operate two systems on the same antenna starts with knowing the characteristics of the antenna; how much power it can handle and the bandwidth of the antenna. You will need an antenna

Before you start going too deep go look at the FCC license for the business. Note the dates of the grant and determine if the license is still valid. Licenses are granted for 10 years and then must be

Does anyone know anything about the Crescend Technologies P25-2AC1-C1-002 amplifier? I found one that is for sale and its label says it operates 42 to 50Mhz and 2.5 watts input for 250 watts out. But

Hello to all. I have a real nice Kenwood TKR-850 repeater that I have no location for. It is currently on 444.700. I will program it for you and ship it for 575.00. I also have several zetron 38A

Yea I realize the jacks are different, they added a pin on each side of the regular 8. Everything is suppose to be the same as the maxtrax/radius series other then the extra pins for other use. As for

I've put ham and commercial repeaters on the same antenna before but it's not easy. It takes an extra 6 cavity duplexer that is notch only.. and very careful tuning. I once had two Motorola Quantars,

https://ebay.us/m/16KnHO -- N1LMA

I had a question posed to me so thought I would pose it here. The local club has a 7cm DMR repeater antenna is at 500 ft.. They are interested in adding a GMRS repeater use cavities to combine the two

An organization I work with has an old Motorola GR1225 (business freq) with an odd issue that we're trying to diagnose.? None of us are radio technicians...just audio/visual & IT guys (a couple of us

Must be good drugs, John....Riley Hollingsworth pretty well settled it [email protected]> wrote: