开云体育

<-- Hi Mike:? Have you been able to "read" the repeater using the Kenwood programming software (i.e., to confirm he RX frequency)? Can you hear anything via the local speaker (you do need the

Got a TKR-850 that was abandoned at a tower site.. powers on and transmits fine (can transmit using CW ID button and getting 25w output) but receive appears deaf, Busy light is staying on and can't

Telewave makes a folded dipole that works very well.? I regularly drive by a California Highway Patrol office that has two on the tower. Here's the 45-54 MHz

I know this is a long shot, but does anyone have a pair of channel elements crystalled for 147.180 TX, 147.780 RX for the MSR-2000 they'd like to sell? I thought I'd check here before I order a set

A Victron Smart with a Victron SmartShunt right at the battery (such that the shunt only sees battery current and not load current) is a reasonable approach if you have lead-acid (flooded or AGM). See

A DB 201 or 212 is the best on lowband...there are a lot left abandoned at sites in still good shape. You can probably find one looking around...cheaper than a new one but it WILL work Chris

Kreco , stupid auto correct. Ken Pearce N4KCD Commerce Township, MI

Oreo is good and I use either Tessco or Talley. Ken Pearce N4KCD Commerce Township, MI

I believe Sinclair and Comprod still make their versions. Chuck WB2EDV

Kreco makes both folded monopole ground plane and coaxial dipoles for VHF lo band. For something a little less expensive Child’s Antenna Company makes a VHF lo coaxial dipole.

Since I'm not stuck on the Iota, a Victron Smart IP22, IP43, IP67 12/30 or 12/50 - are spec'd to 14.7v max. Quick review of battery products... LiTime - max V = 14.6 BattleBorn = 14.7 WattCycle =

I've been tasked by our Red Cross regional director to get a 47 MHz antenna installed for "low band" VHF use on one of their buildings.? It seems to be a difficult band to find commercial antennas

Hey Bob, don’t worry I’ve had my turn in the bucket. This list has some extremely knowledgeable guys on here and I know you, your background and your technical background, they don’t. I

On Sat, Apr 26, 2025 at 04:56 PM, Chuck Kelsey wrote: > > NOTHING is safe if "big money" wants it... NOTHING. > > Chuck > > > > On 4/26/2025 4:25 PM, John N. Hudson III via groups.io wrote: >

NOTHING is safe if "big money" wants it... NOTHING. Chuck

Bob we have discussed this and you have a valid point. But as you know the spectrum is crowded in SoCal with only a few High Level channels, Trustees are limited to 3 pairs but they can co-channel

Hi Guys I am Sorry my reply to the original question should have been: Check your repeater settings, so it does not beacon, WOW I got it !! Sorry I missed the post from another SL5700 user

Ignore the first two images close to the top. They are earlier plots.

Hello Ron, A couple things here. The "1" in the last of the model number is 433 MHz not 443 MHz. I believe that with the shift method, or hex edit, will only let you go down in frequency, not

I was recently given a pair of GP300 HTs and am trying to get them reprogrammed for some new hams in the area. I have the programmer and RSS and can download the codeplug.? But, these are 398-443