开云体育

ARRGGHH *I hate HOW

(I hate out this particular forum doesn't let you edit a message) What I meant to say is all old DOS software relies on being in Real Mode, and doesn't know what Protected Mode is. It's all

I think the problem is that even if everything's mapped correctly, you're still using DOSBOX; hence, you're in Protected Mode, which all old Moto DOS RSS relies on. I seem to recall that new fork

I think that's it. Like I said elsewhere I went to do the PA output align but got sidetracked... But pretty sure that was the problem since four PAs did the same thing GeorgeC

used the service monitor output on 10 mhz for reference. With no reference the station will not transmit or receive, so had that part covered GeorgeC

Frank, Ron here from MCC.? The RC-100's RB timeout enable/disable (toggle code) is at 4151 Dxx code. Let me know if you need more info or help. 73, ron, n9ee MCC

Hi, Sorry for the late reply. I was still trying but I have officially given up on the ics. Did you have a northcomm? Thanks Robert [email protected]> wrote:

Please see: https://www.repeater-builder.com/motorola/spectra/spectra-index.html I'd guess that you'd want to look at any sort of Data PTT function the radio may have. Hopefully someone will chime

All, On batlabs's spectra page it mentions that there is an option on the analog spectra to do flat tx/rx audio which I need for some data purposes,? It also mentions that hte info is in the service

I've searched the existing topics without finding what I need. I have an RC-100 that's working well, but I'd like to disable the base station timeout. I have worked with the tones, but it's been a

Same cable as used on the Midland Base Tech II and III stations, if that helps. They are rebadged KG510s. Chris/AJM -- Chris Baldwin, CETSr. (KF6AJM) Trustee - MetroNET Cal. Intertie (KB3PX)

That is correct. Fortunately, Kenwood did correct that oversight in their new NXR-1000 series. ALTHOUGH, I'm disappointed there are no options to be able to control encoded CTCSS/DCS via external

Correct me if I'm wrong (Ken??), but the D710 doesn't have the facilities for use with an external controller, specifically the audio I/O. I had a few of these and sold them for this very reason. They

A Quantar chassis is universal, you can put in any modules and it all works the same. I agree on checking the transmitter power alignment.

I’ll bet your 900 chassis has a high stability oscillator installed and your 800 doesn’t It creates trouble…. Mark N2OJD

Did you perform the PA alignment? The values stored for orig PA and exciter may be way out for the 900 PA. Just do a PA INIT, and try again. Tom n7oep WRBK584

Folks I had something odd here. I have three Quantars in service, all 100W, one UHF in 441 band, two 927 band. I had a PA fail on the 927 in Cedar Hill so for tight now I pulled the PA from the local

I have available free for pickup three vhf Micor base stations. One of them has a 136-150mHz PA deck, that was working when last in service about ten years ago. There have been various parts robbed,

Hi all, Has anyone got a picture of the heatsink that goes under the Rx radio in a TB7100? I've added some photos of how it looks on a TM81XX Thanks

Remember that radios of this vintage require an old, slow DOS computer, or the system won't talk properly.? I use a Compaq 386 "lunchbox" computer that is native DOS (and works just dandy on