开云体育

Hi Dave Please provide your contact info if you have more amps to sell. Thank you. K3HKZ Cadams@... Charles Adams Industrial Communications Co. Mobile 610-360-0050 Office

I'd like to purchase one. Can you provide your direct email address, so I can contact you off list? Thanks. -David gmail.com@groups.io> wrote:

good afternoon I have a problem with a Motorola Dr3000 vhf (xpr8300) the repeater turns on, goes through its entire control cycle and goes into standby, the problem is that it does not transmit or

<-- Great! - I located Jared's diagram and made up a cable this morning.? One correction to the diagram (at least for my R2660A Test Set), the DB9 on the test set is a Female, so the DB9 on the

Larry, I'm trying to build a GMRS repeater using CDM1250 radios, ID-O-Matic IV and one of the inexpensive six bay duplexers. While I'm waiting for the ID-O-Matic delivery, delayed for weather, I

OK, good to know. Thanks. Chad Nelson WI9HF/WRPL979 Janesville Wisconsin 608-754-8671 Send from my spectrum iPhone 16.

You betcha … over $1600 new Dave Bates charter.net@groups.io> wrote:

These are great, very reliable amps ! Dave Bates gmail.com@groups.io> wrote:

Hi, Are these repeater amps? Sent: Friday, March 7, 2025 8:54 PM To: repeater-builder@groups.io Subject: [repeater-builder] UHF Amp for sale I have several of these available. They look to

I have several of these available. They look to be very clean and test well at 100W out with 1-4W input. I tried them down to 440MHz and there was no change in power output. Crescend makes these in a

Buy an all in one package ready to go You got everything and your GMRS license. Wait you will regret it if you don’t get a very good quality Lightning arrestor & a nice run of copper wire and a

Based on your description of the site a repeater should work well. If you can mostly see the house from anywhere on the resort it should be fine. Next up is build or buy? Personally I went the

Ramesh its just the mentioned monitor? Acer V196WL wired per Jareds diagram I tried several other VGA input monitors I had sitting around and the ACER was the only monitor that worked de k9wkj

<-- Please do share details :). Ramesh, VA3UV, WA3UV

Actually it applies in that case as well. Antenna gain woks the same way as mentioned.? He still will want to limit antenna gain and be aware of the antenna radiation pattern and not just stick the

I'm not sure that you understand what he is wanting to do. He is staying 300 feet above the valley, but wanting to have coverage on the mountain up to 3,000 feet. Opposite of what it looks like you

shes a runner! just have to make up a ham proof cable!

Couple things to keep in mind with all this.? ?Running a high gain antenna with a high HAAT can cause coverage issues in the valley below. Gain in an antenna is accomplished by changing the

An MMDVM *Modem* board, not a hotspot board.

Don't know how significant of update this is, but I did find out there are at least two pallets of equipment in storage. Most of it may be VHF TB8100s and some TB8500s, we think. We have 13 multi-cast