开云体育

Well time for me to throw to half Pennie’s into the mess. And I fall directly into this question. I put my own DMR system because dmr around me sucks and the coverage is worth crap. those hotspot

Hi to All, For part to finish a project I am looking for a Tait T500 VHF Mobile. I know this radio was not to good even new with plastic cover and is very out of date but hoping someone has

In the case of the processing on W6MEP, the pre-emphasis is part of the ORBAN 8100A processor and the two work together to maintain deviation.? The processing consists of both gated AGC and a peak

I’ll check to see if the battery is under the required voltage. I have a battery tender from a motorcycle I no longer own. Guess I’ll add that to trickle the backup battery.

While I like your idea of operating a battery and forgoing the AC all together, that would limit the output power to 20 watts.

/g/FCC-Rules [email protected]> wrote:

Hi Tyler, I remember that X2212 chip in a 1/2 tape drive, CDC or something 1980ish. For the Tait T800 series with eproms, I've just programmed? a 25KHz channel spacing eprom covering 146.000 to

The two DR-2X that we own say that you can’t recharge the battery from the repeater. It says you need an external regulated charger to recharge the battery.

At 1/3/2025 04:11 PM, you wrote: On 1/3/2025 5:39 PM, Kevin Magloughlin via groups.io wrote: > FCC Rules group is open for business! Has anyone found the group? I could not tell if it's a subgroup

Has anyone found the group? I could not tell if it's a subgroup of this one or a new groups.io. But nothing showing in the groups.io search yet. (Though I did find some other interesting

Thank you for doing that, Kevin … Dave Bates [email protected]> wrote:

FCC Rules group is open for business! Come on over and blast away! ?FCC Rules part 97, 95, 90 and 22! Just keep the conversation civil! 73 Kevin

MTR2000 (UHF, 100w) which is reporting a PA fan fault, but the fan is spinning.? No funny noises of on fan behavior observed.? PS fan spins brief and then stops and is not reporting any

Tyler, I was mistaken on the par number. I have two models of radio interface here: TQ3370 and TQ3330. The TQ3330 is marked RANGR/DELTA with a cable. I have two TQ3370s (one new in a sealed bag) and

Actually - the definition says this - exactly: *Repeater-Builder is a free ***technical group *(free to you - we pay for a premium group plan) available to people seeking information on building ham

I've tested my DR-2X for battery switch over but have never left it connected for actual battery backup. Like any other repeater here I would use a 120VAC coil relay to disconnect the battery during

There is a micro fuse in the Yaesu supply that enables charging the battery. If the battery is very dead when the AC power restores there is a good probability that the fuse blew. You can open the

Oh, it probably did, then when power came back, the supply in the Yaesu Crow-bared or whatever it does. It's a common problem. I don't know the fix, other than don't let the Yaesu attempt to

Burt; Can you share what audio processor used in the W6MEP? Thanks K4SAT

You may want to better define "private". Matt AL0R From: [email protected] <[email protected]> On Behalf Of paul dallard via groups.io Sent: Friday, January 3, 2025