开云体育

Hi All! It is almost impossible to get a response from MFJ by calling them on 1-662-323-0549 from VU Land. Nor can I buy a used one or a new one of this equipment. My only option is to replace the

I changed one some years ago and yes I'm pretty sure it is just a standard 1602, the last time I got some was from Aliexpress

It does bring a lot to light. A flexible use license could sure be LTE, and once they have the spectrum it is one step away from cell companies using it. The 900 spectrum is already used for other

Thanks Bob, we've taken note of that. To clarify on 900MHz rebanding, this is affecting all 900MHz commercial entities in the 935MHz area. It's all Anterix. Who's Anterix? Formerly pdvWireless.

Well that proves it - they are in bed with Anterix, and this spectrum would actually be to supplement the ongoing "rebanding" of 900MHz (*NOT* 800) set in motion by Anterix for their 900MHz "Private

Thank you. -- - Regards, Karl Shoemaker To contact me, please visit SRG's web site at http://www.srgclub.org for the current email address.

A couple of items I forgot in the previous post... RLC-MOT Squelch Board - New and Unused - Asking $50 Advanced Receiver Research Preamplifier P432VDG - Used but fully functional - Asking

After further organizing my storage facility, I have found the following items: ICOM UX-59A 6M band unit for IC-900/901 - New and unused. ICOM UX-39A 220 band unit for IC-900/901 - New and

Looks like a standard 1602 display. You can pick them up for a couple bucks on Amason or eBay. Sent: Saturday, August 10, 2024 5:59 PM To: [email protected] Subject: Re:

You'll have some work to do, but it's a parallel 2X16 LCD display. You will have to match up with the schematic with what you can buy. There are a lot of them out there. Schematic is on

You might be better off to buy a used one or a new one. Bruce WA1YZN

MFJ ended their manufacturing, (which is mostly in China). Call them for information on parts (1-662-323-0549). Gary

The LCD display of my MFJ-259C antenna analyser has become defective. Can any one please specify the details of the display used so that I can replace the same? I am a HAM radio operator and live in

Sounds like they got the documentation reversed. You never want to run a digital signal through a clipper, etc Chris WB5ITT [email protected]> wrote:

The VXR9000 documentation isn't clear on the treatment of audio applied to the TX AF IN pin 3. ?It indicates that audio is "injected before the splatter filter stage" However, audio applied to pin 24

Would the shift, top number row ?entry in RSS get you there if they are wrong split?

Thank you for printing me there! I need the third character in the model number to be a 4, and the tenth to be a 3. I don't much care about output power. The Gm300 would be the reciver. I have a cdm

At 8/9/2024 10:35 AM, you wrote: I'm of the opinion that at least here in Southern California, the 900MHz amateur band is absolutely useless unless you're running a digital mode that cuts through

I’ll look it up and get back to you. Kevin

Msf5000. got help from Kevin to get it aligned and it works great…. Kinda. For those of us that know about the pa adjust point and that point being broken by some fat fingered joker with the wrong