开云体育

Many of you who have just joined the server had some trouble subscribing. This message I am forwarding pertains to the situation. This message originated from the Onelist Team and has not been

Need Help in identify a few jacks on the Master II UHF repeater. looking at the rear of the Master II there is the bus bar it is labeled and to the left of it is a series of Jacks labeled J1201,

David Armstrong KF4LJR Technical Advisor, Southeastern, Division 440 Plunkett Dr. Horton, Al 35980 205-593-5321 home of the 443.725 Repeator **** Would a gamma matched dipole be dc

I have two 100 watt VHF Micors for sale. Originally got them for a repeater project that didn't materialize. Channel elements are included as well as the main harness. Also have some control heads

Have Problems i have obtain another GE Mater II UHF repeater and it is dead !!!! i have check the 10v regulator card in another repeater and it works great i have found out that the control board

Hello Chris and All, My comments to Chris' opinions. "CHRISTOPHER W. (Chris) BOONE" wrote: You are allowed to disagree....doesn't mean you're right. Well some people who subscribe through Juno and

Anybody on this list doing any trunking with ham repeaters?? If you are, what kind of format are you using, controller, radios etc ?? the 900mhz band would be the best band to do it, alot of

dchall wrote: Dave, and All on the list, Thanks to Rich Reese WA8DBW we now have an Astron RS-12A schematic. This new page can be seen by going to the Astron page

JHowel@... wrote: I'll check and see if I can come up with some. If I don't reply about this in a couple of days and

Gang, I was asked to pass this information along. This information originated from the owners of "Onelist. com" our list server. Kevin

"Richard D. Reese" wrote: Rich, Go ahead and send it. The guy was eager to get his PS working. I'll decrease color

JHowel@... wrote: I'll check, Do you need for both transmit and receive? How many of each? Any particular frequency you are looking for? Kevin

Brent DeSalvo KF4TNP wrote: No... try....http://www.geocities.com/CapeCanaveral/3161/repeater.htm kkc

writes: I would need transmit and receive (a minimum of one set right now, though I have a stack of the beasts and might eventually want to do something with the lot). I'm making an attempt at

"Kevin K. Custer W3KKC" wrote: Does anyone have a schematic for an Astron RS-12A? Kevin, I have a jpg image of the RS-12 but it is about 195K! If you wish I can send it to you if you are in a

Just sending this to get the RPITP Url from the bottome of the message lost all info pertaining to url's and e-mails netscape crashed and it deleted my book marks and all while i am here i got ?

JHowel@... wrote: What band please? kuggie

writes: Sorry, I realize now I forgot to mention that - 136-174. Thanks. Jeff

Yes, you can interchange them, but you can never use an EC element with a 2C. The temperature compensation for an EC *must* come from a 5C element. The 2C only compensates itself. Joe, KR3P Brent