开云体育

Clonezilla if you want something free but it's CLi driven, Acronis True Image (if it's still around) if you don't mind paying for it as it has a nice 'pointy-clickey' interface...

If you can find a 5.25 IDE drive, there are external USB drive enclosures for them. The guy that runs the LGR channel on youtube may be of assistance, his email is clint@... Best, ?

Speaking of which, can anyone here copy files from 5-1/4" floppies to a CD or thumb drive? There are expensive rescue services, but the files are of old controller software solely for archival

Download and image GParted to a USB drive. It's the closest modern thing to Ghost. Best, ?? -Adam WJ4X

I use a program called image for windows. Go to https://www.terabyteunlimited.com/

Hi Mike, ? Check out the link below, may be something you can use. ? https://rescuezilla.com/ ? 73 de Pamela - N1ZKH Sunday, October 30, 2022, 5:14:18 AM, you wrote:

Years ago (before Norton bought them) I used Ghost to image hard drives (I was doing field support for a bank).? it worked elegantly. I could clone one drive to another (usually larger), or creating

Thanks for the great information, even thought the MTR 2000 has battery backup, I am sure it was a power bump. I read the repeater and everything was good so I re-programmed it and it is working fine

I'll rerun this in case it benefits anyone: https://www.youtube.com/watch?v=U7QZzzB2LZU I also would mess with the interconnect cabling. You will cause yourself a lot of problems doing that. Mick -

From this post: /g/repeater-builder/message/195129 I'm not sure Jared has the capability to accurately measure RL. This is especially true if the directional coupler he is using as

* My calculations say injecting the signal into antenna port of the duplexer with the transmit side terminated, * the repeater should take 0.41uV or -114dBm to reach 12DB SINAD assuming the repeater

I figured I probably am chasing my tail on the repeater end. But a trip to the dealer would make me feel better. My calculations say injecting the signal into antenna port of the duplexer with the

You may be chasing your tail.? Signal generators/service monitors are not all that accurate.? ?I was playing around with a couple of HP 8924c and an IFR 1200s.? I noticed that even after about 10

Jim, I thought I had copied your message in my response, but I guess not.? This is what you sent.? I'm not sure how it will open the path for the wide band audio connections via pins 9 & 34 of the

If I get what you’re saying, I already ran those results. I inputted a signal through the antenna port on the duplexer and into the receiver through the duplexer. I had the transmitter side of the

I don’t doubt the Honeywell li-ion batteries. ?I just need a 7100/7200 series charger that will charge the li-ion batteries that are shaped like a legacy nmh battery. ?I have twelve NEW li-ion

We used to run Honeywell lithium polymer batteries on our XTS 5000s. Great batteries! They lasted 20+ hours with moderate transmit and near constant receive activity in talkgroup scan on a busy P25

This can also occur if you have removed one of the option cards or have made a change in the codeplug that would need one of the option cards to function. Read the codeplug and as Millin has said find

Glenn.. unplug the repeater, read the repeater to see where the error is located in the software .. sometimes the blinking red light indicates a power bump or a shot PA. So read the repeater clear