开云体育

The link worked fine for me. Chuck

Rick your pic/info re the fuse didn't come thru---could you try again please? tnx 73 Jerry VE3EXT

That is the replacement fuse I ordered and used in a Motorola R2600C. It looked identical to the blown one I replaced. Rick KC0HH

tnx Bob for the comments Do you know where these "smaller"fuses might be available? tnx Jerry VE3EXT

While the Picofuse is what everybody recommends, take a look at the outside diameter of the fuse, then measure the inside diameter of the hole in the back of the BNC connector to verify that it will

Sold. Thanks for looking!

tnx joe for your help jerry ve3 ext

Through all my Kenwood TK radio acquisitions I ended up with 2 or 3 radios with functional main boards but the control board/CPU is dead, so I'd like to find some control boards to revive those

Jerry, That fuse should work just fine. Your choice of the very fast acting style is the correct series for the antenna input fuse. I think that is a very fair price for 5 of them. Joe - WA7JAW

PM sent -- Clif Holland KA5IPF www.avvid.com

Working, used TKR-750-1 programmed for 147.06/plus offset/no pl. Puts out 20 on the power up setting or 48 watts on high power. No power cord, no manual, just a bare working repeater. Box is from an

I've blown the pico fuse under the bnc antenna connector. Will this one do ?? https://www.amazon.com/gp/product/B012DNXMWY/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 If someone has the exact

Guys, Thanks again for the details. I've been testing this for the past week on the bench and its working great! Man, I wish I played with using the Allstar image on a RaspPI and mod'd CM108 FOB

Not sure why the hate on CWID. Either CWID or VOICE is just fine under part 95 use. excerpt: (b) The call sign must be transmitted (

Why not ID the repeater by cw? Even commercial repeaters I know are done that way. Most users wouldn’t hear it because they have pl on receive and the repeater doesn’t transmit pl during the id

I am actually connecting ID-O-Matic IV to TKR-850 it is GMRS repeater and the entire idea of ID-O-Matic was to have voice identification instead CWID. According to other people I should not really ID

I think you're thinking about the TK-805D/DN, or the TK-809 which is also only narrowband. The TK-760/860 does in fact have wide and narrow capability - see attached. Bob NO6B

You say that you are connecting an ID-O-Matic IV to the TKR-750. What is the ID-O-Matic going to do for you that the internal controller won't do? Joe