开云体育

The 'video out' is the connector you need to connect to an external monitor or the GSB8200 type board.

Thanks for the info. I have an HP 8935, I assume it would work on this as well, I have a couple of BNC connectors one is labeled "scope monitor out" and the other BNC is "video out". I assume it would

Thanks for the info! I was able to find the tuning procedure here? in the message archives and, combined with your insights, it all makes sense now. The extra adjustments are capacitors to maximize

I'm out of town on a job so I can't check my notes, but from memory it should be 1-14 pF, Johanson 5402 or similar. Jeff's parts stock. Email me direct, I'll be back in town this weekend. --- Jeff

Then why do my TK-860s have a narrow/wide setting?

Well..Kenwood repeaters are commercial radios and Type Accepted. Definitely not 2 mobiles in a box Ken ------------------------------------------------------------------------------ President and CTO

None of the Kenwood repeaters are "2 mobiles in a box". They are all built as repeaters. And damn good ones too. (from a guy who has put together a bunch of Micor rptrs...)

Bob, Thanks for that info. I'll keep it in my back pocket in case my repair doesn't work out. 73 and aloha, Eric KH6CQ

I am trying find/buy a copy of the programming software for the CAT WX-250.? I tried several variations in a google search to no avail.? Any help would be appreciated. Thanks

Ding ding ding! Btw, the G in this case tells you that it is narrowband compliant for Part 90. The non-G is not.

omg...you do know the internet isn't radio, right?

This is a widely misunderstood interpretation of the law. It is, in fact, expressly permitted by law:

Streaming? Isn't that rebroadcasting which is illegal?

OK finally done pulling my hair out on this!? ?Tried old versions 15, 14, 13, dug out old Win 7 PC's, etc. still no comms, ready to throw this thing off the balcony, then FINALLY dug out a *8?year

Great info! Nice to know whenever my screen finally fails alexandre.tabajara@...> wrote:

Greetings from Brazil I don't know how offtopic it is here. But I believe it must help someone here https://tabajara-labs.blogspot.com/2021/01/como-ligar-um-monitor-vga-no-hp-e8285a.html 73 de PU2SEX,

Frank Perkins wrote: "Just another note about using mobile radios in a repeater. Yes, their IFs were wide (stagger-tuned) to allow good function across the band coverage. However, since in

Hi Frank and the group, About three years ago I put together a "Low Bucks" repeater (UHF), using two GE "MVS" radios. Kept each radio intact and used the option cable to all input/output to an NHRC-4

A couple further thoughts. The factory TX and RX markings are from the perspective of a mobile that transmits in the 459 range and receives in the 454 range. Sweep it to see where it's currently

Hi folks, Just another note about using mobile radios in a repeater. Yes, their IFs were wide (stagger-tuned) to allow good function across the band coverage. However, since in single-frequency