开云体育

That's what I'm using now. Took the spk/hi terminal, through a 2.2uF cap into a 10k pot, feeding the mic/hi terminal. I find the TX audio "rough"? I thought it would be a smoother response, but I

Thanks Tom. I'll try that next time I open the radio! Tedd Doda CET CEO Lazer Audio and Electronics packet ve3tjd@va3sed e-mail lazer@...

Hello Tedd I have been using a master II on 2 meters for a long time with a controller. It should not be difficult to get your recieve audio to the transmitter, but it will sound tinny if you take

Lloyd wrote:

As promised I have the information on the FM broadcast transmitter and amp I have and have used to cover a complete town. The unit I have is called a Wavemach FMS-2 exciter I also have a 2.5 watt

-- Please disregard my sending address of kuggie@... I am using an alternate ISP for sending messages only. (shol.com) Kevin Custer W3KKC kuggie@...

"Kevin K. Custer W3KKC" wrote:

Transmit audio can come from the last pin onthe ifas board (I think) labled rx pa on the schematic you can run this into the mic hi input but do it through a sutable capacitor to keep the dc off It

Hi Guys: I was playing with my Mastr II on 6 meters, getting ready to devise a way to get PTT from the CAS line (no controller yet). I tried a 2n3904, but found that it loaded the CAS line. I

I do deal in the area of FM Broadcast to, but not at 1 to 3 watts. The equipment I deal with in this area starts at 5Kw and is more of a toy in Broadcast standards. Then I have 10Kw, 30Kw, 50Kw and

From: Mark KC7ETX Tacoma, Wa. Subject: Motorola Mcx100 & 1000 programming

WTB: UHF/VHF HT I'm looking for another HTX202 and/or a pair of 404's. I am disabled and got my hands on a MCC-1000v repeater controller and I just want a pair of radios to hook up to the controller

Hi the name is Lloyd, the call is VE7-LWB. I have a small radio shop and I can tune cavity cans for anyone that wishs. This is not a screw driver type outfit, but I do it the right way, with the

Thanks very much to all those that offered such quick response on my querry. 73 from Doug VE6ZH ---------- wrote: several,would

Change the squelch IC. Let me know if you need some. John

Can someone direct me to the website that explained duplexer tuning using the Bird Signal Sampler? I failed to bookmark it late one night & forgot how I found it. Thanks. 73...Mike Fletcher

Hello knowledgable listers, This is my first post. Just found the list. My compliments to all responsible. Here goes: I have a DB-212 (6m side mounted 1/2 wave folded dipole) and a DB-225

Mcx 100 is a prom the same as syntor. The person you need to contact is Paul Bennett his e-mail is pbennett@... or if you would like to call (503) 472-5644 . Hehas a program that will burn

Hello All, We have put the time program on our website and it's available for downloading. This is the program that allows users to set the time on any CAT controller from their PC by holding the

I need a working used Motorola Micor audio/squelch board--mine has lost squelch control but otheraise works. Will trade it in if you wuould like. Steve Liggett, WA4BVO Stevel@...