Are they solely wireless with no hard wiring? And they're battery powered
I assume?
Ken
At 10:44 AM 4/14/2025, you wrote:
toggle quoted message
Show quoted text
if there is interet or wifi at
the site...the little wyze cam v3 is awesome. We use them at mulitple
sites and they work great and you can give access to multiple users if
you want. Incredibly easy to setup.?? jonny? kf6phx
From: [email protected]
<[email protected]> on behalf of Chad Nelson
<chad.nelson71@...>
Sent: Saturday, April 12, 2025 5:06 PM
To: [email protected]
<[email protected]>
Subject: Re: [repeater-builder] Be on the lookout
?
Hey Johnny, that's a good idea! You just gave me a really good idea for
my repeater site that I'm gonna start to be using shortly. Should maybe
find tiny surveillance camera and connect it up so I have monitoring
capability visually. Just need to figure out how to get it to transmit
over the Internet to my location 60 miles away.
Chad Nelson WI9HF/WRPL979
Janesville Wisconsin
608-754-8671
Send from my spectrum iPhone 16.
On Apr 12, 2025, at 6:29?�?PM,
Jonny Tomlinson KF6PHX via groups.io <jstlink@...>
wrote:
???
No cameras?
Kf6phx
Sent from my Verizon, Samsung Galaxy smartphone
Get
From: [email protected]
<[email protected]> on behalf of Chris Boone WB5ITT via
groups.io <setxtelecom@...>
Sent: Saturday, April 12, 2025 4:16:27 PM
To: [email protected]
<[email protected]>
Subject: [repeater-builder] Be on the lookout
?
Motorola VHF Quantar SN 509CLR1418
stolen from site last Thursday...
Along with DB4060B ...missing mounting brackets. Both tuned to 146.36/96
pair
they cut the tie wraps holding the 4 cans together..the brackets had been
misplaced but found and were to be reinstalled when repeater was
discovered missing
Also cables from rptr to duplexer and duplexer to Heliax gone....Sinclair
Duplexer in cabinet that the rptr was sitting on not touched nor a UHF
MII repeater...so this was personal....and I have 4 suspects in the
list.
Sheriff's office has been contacted.
Contacting Boone Co Iowa (ironic) where the duplexer was bought from to
get the SN on both units bought..lost the paperwork
Chris WB5ITT
------------------------------------------------------------------------------
President and CTO - Arcom Controllers
Makers of repeater controllers and accessories
Phone: (503) 678 6182
Authorized Dealers for Kenwood and Telewave.
We offer complete turn-key repeater packages!
"We don't just make 'em. We use 'em!"
![[]](http://www.arcomcontrollers.com/arcom.png)
|
if there is interet or wifi at the site...the little wyze cam v3 is awesome. We use them at mulitple sites and they work great and you can give access to multiple users if you want. Incredibly easy to setup.?? jonny? kf6phx
toggle quoted message
Show quoted text
Hey Johnny, that's a good idea! You just gave me a really good idea for my repeater site that I'm gonna start to be using shortly. Should maybe find tiny surveillance camera and connect it up so I have monitoring capability visually. Just need
to figure out how to get it to transmit over the Internet to my location 60 miles away.
Chad Nelson WI9HF/WRPL979
Janesville Wisconsin
608-754-8671
Send from my spectrum iPhone 16.
On Apr 12, 2025, at 6:29?PM, Jonny Tomlinson KF6PHX via groups.io <jstlink@...> wrote:
?
No cameras?
Kf6phx
Sent from my Verizon, Samsung Galaxy smartphone
Get
Motorola VHF Quantar SN 509CLR1418
stolen from site last Thursday...
Along with DB4060B ...missing mounting brackets. Both tuned to 146.36/96 pair?
they cut the tie wraps holding the 4 cans together..the brackets had been misplaced but found and were to be reinstalled when repeater was discovered missing?
Also cables from rptr to duplexer and duplexer to Heliax gone....Sinclair Duplexer in cabinet that the rptr was sitting on not touched nor a UHF MII repeater...so this was personal....and I have 4 suspects in the list.
Sheriff's office has been contacted.
Contacting Boone Co Iowa (ironic) where the duplexer was bought from to get the SN on both units bought..lost the paperwork?
Chris WB5ITT?
|
Swap: Ics controllers quantar 1x for a northcomm quantar ecm.
Looking to swap a brand new ics control quantar 1x for the northcomm quantar ecm and program cable.
I'm looking for a more simple plug and play solution than something I need to jump through all sorts of gyration to get up and?running.
And I don't need all the capabilities of the ics I just need remote disable, and courtesy beep.
So the northcomm might be better for me and the ics might be suited to someone who has more patience than i do to set it up properly and needs the advanced functionality of the ics.
I'm only using this on a gmrs repeater so I don't need a bunch of advanced features or digital linking.
My understanding is the northcomm is just set wildcards in quantar and then 1 adjustment on the board that requires no test gear to set it up.
Suffice to say I can't get courtesy beep or remote disable to function on my quantar with the ics and the ics is brand new. I got voice id'er to work fine so I'm sure it's a setting on the ics board. I'm just out of patience to screw with it.
I want an overall plug and play unit. I will also sell the ics outright for what i paid for it in leu of a swap.
Let me be clear it's not ics fault it's l something I'm not doing correctly and I don't have the eyesight or dexterity in my hands anymore to work with small stuff like this board.
Thanks
Robert Chrysafis
Kc8gpd
Wrcm325
Scottsbluff NE
|
Hi Chris
perfect timing we are in need of the isocoupler to get our vhf repeater back on air
If still available?
contact info
ldanna. At comcast dot net
?
regards
larry wa3kok
?
?
|
apparently if you put something on the internet it stays on the internet ;-)
I found this we are going to try it soon:
?
?
The 403-435 MHz station is limited by RSS, but apparently the exciter and power amplifier will operateover a larger range. The range values are all stored as 8-byte double-precision values, easily found andchanged using most hex editors.
A Belgian amateur operator needed his station to work up to 440 MHz, the upper range for his country. Hecontacted me and inquired. I gave him a list of addresses to change. Here's the procedure.
Make a backup copy of MPS.EXE in the MTR2000 folder. Better to have it and not need it than to need itand not have it.
Open the MPS.EXE file. Set your hex editor for "Little Endian / Intel Byte Order".
?
Search for the 64-bit (8-byte) value 435.000; you should find three locations. The 8-byte value will be:
00 00 00 00 00 30 7B 40
Change all three locations to 440.000 MHz. The 8-byte value will be:
00 00 00 00 00 80 7B 40
It's possible that this change will also raise the lower limit of the 435-470 station up to 440-470, but it got thejob done for the person who requested it.
You should also change the ASCII text that describes the frequency range of the station, PA, and RSS. In the same file, search for the text "435"; you should find four such strings that will say:
403-435_MHz_100W_1_Circ
435-470_MHz_100W_1_Circ
403 - 435 MHz 100W 1 Circ
435 - 470 MHz 100W 1 Circ
Two of those strings are for the 435-470 MHz station. DON'T CHANGE THOSE. Just change the "435" to"440" in the two 403-435 strings, where "435" is the upper range limit. Save the file and you're good to go.
I don't have a 403-435 MHz station to try this on but the amateur who requested this made the mods andreported that the station worked fine. You should go through the transmitter alignment and check the station'sperformance around 439.9 MHz.
?
It appears that 440 MHz is about as high as you can go with the typical station. Of course, your mileage mayvary.
|
To be correct, its a 403 - 435 version.
Here in Belgium the ham freq is 430 - 440 .
Apparently there is a procedure to modify the .EXE of the programming software in a HEX editor so that you can get it within our ham freq.
?
Manu - ON7FQ
|
No, i can not go higher than 430 (eu version).
?
Manu - ON7FQ
|
Low band? 420 to 470? You just program it using RSS.? No issues
I have 2 such on 440 ham
Chris WB5ITT
Hi,
I own a MTR2000 UHF Low Band High Power.
Apparently there is a way to get this low band within the ham band (430-440).
I once saw a description on the repeater-builder website but can't find anything about it anymore.
Is there anyone who can help me on my way?
?
Thanks in advance,
Manu - ON7FQ
|
Hi,
I own a MTR2000 UHF Low Band High Power.
Apparently there is a way to get this low band within the ham band (430-440).
I once saw a description on the repeater-builder website but can't find anything about it anymore.
Is there anyone who can help me on my way?
?
Thanks in advance,
Manu - ON7FQ
|
Re: Tait TB7100 Vhf connection to the RB-USB RIM "Lite"!
Send me your rpt.conf in private. Je vais regarder ?a
Richard VE2DJE
Le lun. 14 avr. 2025, 1 h 38?a.m., Gervais Fillion via <ve2ckn2= [email protected]> a écrit?:
Hello everyone,
i am trying to programm my TB7100 Vhf to worked with Scott RB-USB RIM "Lite".
Anyone has done it and if so maybe he could share the file of this repeater or
just a picture where i should go to set it up!
i am almost ok,my AllStar 2.0 is transmetting but it does not hear me but first i need to be sure the Tait is ok!
thanks in adavance for your help,
it will replace a simplex node here.
73/s
Gervais,ve2ckn
|
I forgot to say that the 6881091C63 Detailed Service Manual covers low band, high band and UHF...
everything but the narrowband-only "200" and "700" MHz CDMs.?? They have their own manual.
Mike WA6ILQ
?
?
|
The repeater-builder web site has BOTH the B and C versions of the 6881091C63 Detailed Service Manual
for free download.?? Look here: ?
?
The version C manual is 30.1 MB.? The "B" version is 16.9 MB.??
As big as hard drives are today why not grab both?
Many pages at the web site have multiple revisions of the same manual.?? We started doing that on
the GE LBI pages as GE had a bad habit of trimming good information from the older manuals to
reduce page count (and printing costs).
Mike WA6ILQ
|
But I am looking for the Service manual and I can only find the manual for VHF and UHF. Manual 6881091C63-B, Chapter 7, available on the web site. And I have some question on the output power specs of this radio All lowband CDM's are rated for 60 watts. --- Jeff WN3A
|
Re: Decibel DB4060 Series Duplexers
- I noted the longest leg of the loop is about 3.25" from the solder to first bend.? Does any of this help with identification?
_._,_._,_ Well, maybe can read what’s written better than I can by looking the pic.? The loops should have a part number of 048467, with a suffix of -001 through -005.? If you can make out those designators on the loops you have, send me an inventory of what you have via direct email and we can go from there.? ? If the straight leg of the loop (i.e. the side connected to the center pin of the connector) is 3-1/2” as you reported, that’s a -005 which is a keeper – that loop is used on the high-pass side of a ham-band “B” split duplexer.? ? BUT, based on what I can see in the pic, it looks like it is marked -004, which would be 3-1/4” on the long leg.? So, either your measurement is off a bit (i.e. 3-1/2” vs 3-1/4”), or my eyesight is failing me and it’s not a -004. ? ??????????????????????????????????????????????????????????????????????????????????????????????? --- Jeff WN3A ?
|
Hello,
My previous email was in error! The VHF CDM-1250 is rated for 45W.
The low band 1250 probably higher wattage. Did you look on the web for the model # of radio. Usually specs are listed
Tim
AE7TH
On 04/13/2025 6:37 PM PDT Carl Beaudry <va2cmb@...> wrote:
?
?
Hi to All,
?
I just bought a nice Motorola CDM-1250 Low-Band modified for 6 Meter Ham Band.
?
But I am looking for the Service manual and I can only find the manual for VHF and UHF.
?
The radio does work and turn on by the ignition accessories plug pin but I have some problem with the control head.
?
No ON-Off button function, no Lights for the display, no RX-TX light, no Lightening of the DTMF Mike.
?
And I have some question on the output power specs of this radio, it is set to 65 Watts in CPS put putting out 90 W on my Bird Bench Wattmeter?
?
My Model is : AAM25DKD9AA2AN
?
I am hoping that a member as seen this control heads problem before and somebody as the proper manual for this radio.
?
Or at least the model number info to know what is the normal output power of this radio?
?
Thanks’ to all for looking in their electronic document file.
?
Best 73
Carl
VA2CMB
?
?
|
Hello,
The Motorola CDM-1250 is rated for 45 Watts.
73 de Tim
AE7TH
On 04/13/2025 6:37 PM PDT Carl Beaudry <va2cmb@...> wrote:
?
?
Hi to All,
?
I just bought a nice Motorola CDM-1250 Low-Band modified for 6 Meter Ham Band.
?
But I am looking for the Service manual and I can only find the manual for VHF and UHF.
?
The radio does work and turn on by the ignition accessories plug pin but I have some problem with the control head.
?
No ON-Off button function, no Lights for the display, no RX-TX light, no Lightening of the DTMF Mike.
?
And I have some question on the output power specs of this radio, it is set to 65 Watts in CPS put putting out 90 W on my Bird Bench Wattmeter?
?
My Model is : AAM25DKD9AA2AN
?
I am hoping that a member as seen this control heads problem before and somebody as the proper manual for this radio.
?
Or at least the model number info to know what is the normal output power of this radio?
?
Thanks’ to all for looking in their electronic document file.
?
Best 73
Carl
VA2CMB
?
?
|
Hi to All, ? I just bought a nice Motorola CDM-1250 Low-Band modified for 6 Meter Ham Band. ? But I am looking for the Service manual and I can only find the manual for VHF and UHF. ? The radio does work and turn on by the ignition accessories plug pin but I have some problem with the control head. ? No ON-Off button function, no Lights for the display, no RX-TX light, no Lightening of the DTMF Mike. ? And I have some question on the output power specs of this radio, it is set to 65 Watts in CPS put putting out 90 W on my Bird Bench Wattmeter? ? My Model is : AAM25DKD9AA2AN ? I am hoping that a member as seen this control heads problem before and somebody as the proper manual for this radio. ? Or at least the model number info to know what is the normal output power of this radio? ? Thanks’ to all for looking in their electronic document file. ? Best 73 Carl VA2CMB ? ?
|
Yes, a 6 foot long male to female six pin mini din plug cord. Chad Nelson WI9HF/WRPL979 Janesville Wisconsin 608-754-8671 Send from my spectrum iPhone 16.
toggle quoted message
Show quoted text
On Apr 13, 2025, at 2:55?PM, Lonney K1LH via groups.io <lonney9@...> wrote:
? On Sun, Apr 13, 2025 at 10:03 AM, Jim Aspinwall wrote:
?
?
>
?
|
Re: Decibel DB4060 Series Duplexers
Jeff,
?
I cannot find any labels anywhere on my Duplexers, so I removed the low pass loop housing and took a picture of the bottom of it. ?See attached.? Based on something I read on duplexerrepair.com I was hoping to find information there and I did, but it is hard to read.? ?I noted the longest leg of the loop is about 3.25" from the solder to first bend.? Does any of this help with identification?
?
Thanks!
Jeff KC8VFN
|
Tait TB7100 Vhf connection to the RB-USB RIM "Lite"!
Hello everyone,
i am trying to programm my TB7100 Vhf to worked with Scott RB-USB RIM "Lite".
Anyone has done it and if so maybe he could share the file of this repeater or
just a picture where i should go to set it up!
i am almost ok,my AllStar 2.0 is transmetting but it does not hear me but first i need to be sure the Tait is ok!
thanks in adavance for your help,
it will replace a simplex node here.
73/s
Gervais,ve2ckn
|
Ken Arck AH6LE
Chris Boone WB5ITT
Carl Beaudry
Gervais Fillion